According to the documents published by the 11 departments of the National Development and Reform Commission on May 31, China will focus on the remanufacturing of parts such as automobile engines, gearboxes, and generators, and expand the scope of pilot remanufacturing of auto parts to drive shafts, Oil pump, water pump and other components. At the same time, it promoted the remanufacturing of construction machinery and machine tools, and the renovation of large-scale waste tires.
According to the documents of 11 departments such as the Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Public Security, the Ministry of Finance, the Ministry of Environmental Protection, and the Ministry of Commerce, China will closely focus on improving the efficiency of resource utilization and improving the level of remanufacturing technology and expanding Remanufacturing application fields, nurturing remanufacturing model enterprises, standardizing old parts recovery systems, developing domestic and foreign markets, strengthening laws and regulations, strengthening policy guidance, and gradually forming a remanufacturing operation mechanism and management model suitable for China's national conditions, realizing the scale of remanufacturing , marketization, industrialization, and strive to cultivate the remanufacturing industry into a new economic growth point, promote the formation of a large-scale circular economy, accelerate the construction of a resource-saving, environment-friendly society.
According to the introduction of the Department of Environment and Development of the Development and Reform Commission, remanufacturing refers to the mass production of professionally repaired used auto parts, engineering machinery, and machine tools. The remanufactured products have the same quality and performance as the original new ones. The advanced form of economic “reuse†can save 50% in cost, save 60% of energy, save 70% of materials, and produce almost no solid waste compared with the manufacturing of new products. The development of the remanufacturing industry will not only be conducive to the formation of a circular economy model of “resources-products-waste-products-remanufacturing productsâ€, it will make full use of resources, protect the ecological environment, and create new economic growth points, providing a large number of job opportunities for the community. It is an effective way to promote the development of manufacturing and modern service industries.
China's remanufacturing industry has great potential for development. In 2008, the country’s vehicle ownership reached 49.57 million vehicles (excluding low-speed vehicles), with over 7 million machine tools and 2.9 million units of 14 main types of construction machinery. A large number of equipment will be eliminated after reaching the scrapping requirements, and new decommissioning equipment is still increasing.
In 2005, the State Council made clear its support for the development of remanufacturing in the "Several Opinions on Accelerating the Development of Circular Economy." The first batch of circular economy pilots of the country will regard remanufacturing as a key area. In 2008, the Development and Reform Commission selected 14 auto parts companies to conduct pilot projects. The "Circular Economy Promotion Law" implemented in January last year incorporated remanufacturing into the legal system. By the end of last year, China's auto parts remanufacturing pilot has formed a remanufacturing capacity of 230,000 sets of automobile engines, transmissions, steering gears and generators. An important breakthrough has been made in the research and development of remanufactured basic theories and key technologies. The remanufacturing technologies such as automated nanoparticle composite brush plating developed and applied have reached the international advanced level.
11 departments proposed in the document that China will increase the level of remanufacturing technology, expand the field of remanufacturing applications, cultivate remanufacturing model enterprises, standardize the old parts recovery system, and develop domestic and foreign markets as the main tasks, through the manufacturing industry development plan as soon as possible. Revise the "Administrative Measures for the Retirement of Used Vehicles", appropriately abolish the restrictions on the forced reinstatement of the "five major assemblies" of end-of-life vehicles, improve the economic policies for promoting the development of the remanufacturing industry, establish a remanufacturing supervision and management system, cultivate professional talents, increase propaganda, etc. Ways to promote the accelerated development of this industry.
The development of China's remanufacturing industry is still in its infancy, and it also faces some outstanding problems. It is reflected in the fact that remanufacturing as a new concept has not been widely recognized by consumers and society; the source of remanufactured old parts and the sales channels for remanufactured products are not smooth enough; Relevant laws and regulations such as recycling management need to be revised urgently. The relevant management system is in urgent need of perfection, and the technical standards are still incomplete; lack of policy incentives, the state has no corresponding preferential tax policies for remanufacturing, and financial support is insufficient.
According to the documents of 11 departments such as the Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Public Security, the Ministry of Finance, the Ministry of Environmental Protection, and the Ministry of Commerce, China will closely focus on improving the efficiency of resource utilization and improving the level of remanufacturing technology and expanding Remanufacturing application fields, nurturing remanufacturing model enterprises, standardizing old parts recovery systems, developing domestic and foreign markets, strengthening laws and regulations, strengthening policy guidance, and gradually forming a remanufacturing operation mechanism and management model suitable for China's national conditions, realizing the scale of remanufacturing , marketization, industrialization, and strive to cultivate the remanufacturing industry into a new economic growth point, promote the formation of a large-scale circular economy, accelerate the construction of a resource-saving, environment-friendly society.
According to the introduction of the Department of Environment and Development of the Development and Reform Commission, remanufacturing refers to the mass production of professionally repaired used auto parts, engineering machinery, and machine tools. The remanufactured products have the same quality and performance as the original new ones. The advanced form of economic “reuse†can save 50% in cost, save 60% of energy, save 70% of materials, and produce almost no solid waste compared with the manufacturing of new products. The development of the remanufacturing industry will not only be conducive to the formation of a circular economy model of “resources-products-waste-products-remanufacturing productsâ€, it will make full use of resources, protect the ecological environment, and create new economic growth points, providing a large number of job opportunities for the community. It is an effective way to promote the development of manufacturing and modern service industries.
China's remanufacturing industry has great potential for development. In 2008, the country’s vehicle ownership reached 49.57 million vehicles (excluding low-speed vehicles), with over 7 million machine tools and 2.9 million units of 14 main types of construction machinery. A large number of equipment will be eliminated after reaching the scrapping requirements, and new decommissioning equipment is still increasing.
In 2005, the State Council made clear its support for the development of remanufacturing in the "Several Opinions on Accelerating the Development of Circular Economy." The first batch of circular economy pilots of the country will regard remanufacturing as a key area. In 2008, the Development and Reform Commission selected 14 auto parts companies to conduct pilot projects. The "Circular Economy Promotion Law" implemented in January last year incorporated remanufacturing into the legal system. By the end of last year, China's auto parts remanufacturing pilot has formed a remanufacturing capacity of 230,000 sets of automobile engines, transmissions, steering gears and generators. An important breakthrough has been made in the research and development of remanufactured basic theories and key technologies. The remanufacturing technologies such as automated nanoparticle composite brush plating developed and applied have reached the international advanced level.
11 departments proposed in the document that China will increase the level of remanufacturing technology, expand the field of remanufacturing applications, cultivate remanufacturing model enterprises, standardize the old parts recovery system, and develop domestic and foreign markets as the main tasks, through the manufacturing industry development plan as soon as possible. Revise the "Administrative Measures for the Retirement of Used Vehicles", appropriately abolish the restrictions on the forced reinstatement of the "five major assemblies" of end-of-life vehicles, improve the economic policies for promoting the development of the remanufacturing industry, establish a remanufacturing supervision and management system, cultivate professional talents, increase propaganda, etc. Ways to promote the accelerated development of this industry.
The development of China's remanufacturing industry is still in its infancy, and it also faces some outstanding problems. It is reflected in the fact that remanufacturing as a new concept has not been widely recognized by consumers and society; the source of remanufactured old parts and the sales channels for remanufactured products are not smooth enough; Relevant laws and regulations such as recycling management need to be revised urgently. The relevant management system is in urgent need of perfection, and the technical standards are still incomplete; lack of policy incentives, the state has no corresponding preferential tax policies for remanufacturing, and financial support is insufficient.
workout equipment,workout equipment for gym,workout equipment names,workout equipment all in one
Foshan Laijian Fitness Equipment Co., Ltd. , http://www.fullgymequipment.com