Â
1.Application Materials:
 Fiber Laser Cutting Equipment is suitable for metal cutting with Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy Steel Plate, Spring Steel Sheet, Iron Plate, Galvanized Iron, Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal Plate, Tubes and Pipes, etc
Machine parameters for laser generator:
| Item | Â Parameters |
| Laser type | Fiber laser |
| Power | 500W/1000W/1500W/2000W/3000W/4000W/6000W/8000W/12000W |
| Wave length | 1070-1080nm |
| Electro-optical conversion efficiency | 25-30% |
| XYZ Route | 3025mm/1525mm/100mm |
| Material Cutting thickness | 0.2-8mm |
| Cutting seam width | 0.1-0.2mm |
| Repeat position accuracy | ±0.05mm/500mm |
| Positioning accuracy | ±0.05mm/500mm |
| Max.Moving Speed | 60000mm/min |
| Max.Accerlation speed | 25m/min |
| Max.loading weight | 500kg |
| Machine weight | 2300kg |
| Required Power | 220V Â 50Hz/60Hz |
| Machine size(L*W*H) | 4500mm*2450mm*1700mm |
Â
Configuration of fiber laser cutter:
| Â | Â Description | Qty | Original | Brand |
| 1 | Fiber laser source (500W/800W) | 1SET | China | MAX |
| 2 | Laser cutting head | 1PC | Switzerland | RAYTOOLS |
| 3 | Machine bed and accessories | 1SET | China | Â |
| 4 | Electric control | 1SET | Â | OMRON,Schneider |
| 5 | Gas circuit control | 1SET | Japan | SMC |
| 6 | Precise Rack | Each 3SETS | China |  |
| 7 | Precise linear guide rail | Each 3SETS | Taiwan | PMI |
| 8 | Planetary Gear | 3SET | China | Â |
| 9 | Machine bed accessories | 1SET | China | Â |
| 10 | Digital cutting system | 1SET | USA | AHEADCUT |
| 11 | Industrial control computer | 1SET | China | AHEADCUT |
| 12 | Communication servo and driver | 4SETS | China | Â |
| 13 | Cooling Unit | 1SET | China | Â |
| 14 | Waste recycling equipment | 1SET | China | Â |
Equipment work and environmental requirements
| Â | Requirement |
|
       1 |
Power supply: regulated stable power supply: (recommended)  (1)rated output voltage: 220 v  (2) voltage frequency: 50 hz  (3) the stability of the two phase voltage + 5%  (4) the output voltage adjustment rate: < 2% |
|
      2 |
Cutting with auxiliary gas: Clean, dry compressed air and high purity oxygen (O2) and nitrogen (N2) ,purity no less than 99.9% purity   |
|
     3 |
Cutting material Sheet material is even, smooth;Clean the surface |
|
     4 |
The compressed air supply device (1) the rated pressure:Â 14 Â bar (2)Capacityt: Â 1 m3 |
Theory Cutting parameter
Power(W) |
Material |
Thickness(mm) |
Cutting speed(m/min) |
Gas |
800 |
Stainless steel |
1 |
8-9 |
N2 |
2 |
5-6 |
N2 |
||
3 |
1.8-2 |
N2 |
||
4 |
1.2-1.3 |
N2 |
||
800 |
Carbon steel |
1 |
8-10 |
O2 |
2 |
4-5 |
O2 |
||
3 |
2.8-3 |
O2 |
||
4 |
1.4-1.8 |
O2 |
||
5 |
1.2-1.5 |
O2 |
||
6 |
0.9-1.1 |
O2 |
||
8 |
0.6-0.7 |
O2 |
Power(W) |
Material |
Thickness(mm) |
Cutting speed(m/min) |
Gas |
500 |
Stainless steel |
1 |
6-8 |
N2 |
2 |
2-2.2 |
N2 |
||
3 |
0.6-0.8 |
N2 |
||
500 |
Carbon steel |
1 |
7-8 |
O2 |
2 |
3.5-4 |
O2 |
||
3 |
2.8-3.2 |
O2 |
||
4 |
1.3-1.5 |
O2 |
||
5 |
0.9-1.1 |
O2 |
||
6 |
0.6-0.7 |
O2 |
FAQ
Q: What's the package?
A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the  machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
Q: Will the package damaged during transportation?
A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe tranportation. We have exported to 180 countries worldwide. So please don't worry, you will receive the parcel in good condition.Â
Q: How to install and run the machine?
A: Our technician have installed the machine before shipping. For some small parts installation, we will send detail training video, user's manual along with the machine. 95% customers canlearn by themselves.
Q: How can I do if the machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try fix the machine  by yourself or someone else. We will response within 24 hours as quick as we can to solve it for you.
Â
Construction Hoist Steel Structure
Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.
The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.
The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.
The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.
Construction Hoist Mast Section,Building Hoist Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytopkittowercrane.com