For a novice driver who is exposed to an 8- ton car crane , even if he encounters some common minor problems, he may not be able to handle it. This is normal. This is because novices are unfamiliar with the functions of various parts of the 8- ton car crane and the pros and cons of failing to confirm the size of the fault. Actually, no matter what the fault is, the operator is more concerned with it, repair it earlier and then be able to work normally. Then, what are the failures in the daily use of the hydraulic system of an 8- ton truck crane? The following Xiaobian leads you to see.
In the daily operation, you may encounter high hydraulic oil temperature. Why does the hydraulic oil rise? This is also a certain reason. The oil quantity is not good or the oil is contaminated. The oil quantity is not sufficient due to the design flaw of the 8t car or accidental oil leakage. The oil pollution, especially the oil oxidation pollutant, simply constitutes the cooling system and the clogging of the filter causes the oil temperature. Increased. When it comes to this, someone may ask what the link between hydraulic oil leaks and oil pollution is. This is actually the case. When the oil temperature rises due to the above reasons, the viscosity of the oil will decrease, and the low-viscosity oil is more likely to seep out of the connecting parts. Keeping the temperature low and cleaning the oil is a common way to avoid oil leakage. When a small crane filter or a line blocking the air may pass through a loose connection, the anti-foaming additive in the oil will not produce an effect and bubbles will result. When the long-term use of oil is darkened by the composition of the pigment, this is a normal condition. Because the pigment is soluble in oil, it does not affect the quality of the oil. Therefore, it is not correct to judge the quality of the oil by the color of the oil alone. In addition, the oxides of oil continuously polymerize the oxide adsorbing particles, so that a "sandpaper-like" effect is an adverse consequence of oil deterioration. The deterioration of the oil caused the small crane to wear out. In fact, the deterioration of the oil is essentially the oxidation of the oil! In the end, Xiao Bian also wanted to tell everyone that the service life of hydraulic oil would be affected by air, impurities, temperature, and water, and the consumption and addition of a few new oils would make up for it.
Sheet Metal Fabrication Custom,Machining Parts,Sheet Metal Stamping,Sheet Metal Components
Shenzhen Bergek Technology Co.,LTD , https://www.szbergek.com