The above sensors include a voltage regulator, two Hall-effect sensitive components, a temperature compensation circuit, a low-level amplifier, a bandpass filter, a Schmitt trigger, and an output driver that requires a pull-up resistor. The on-board regulator operates from 4V to 26.5V. The output stage converts 20mA over the entire frequency response range of the sensor and is compatible with bipolar and MOS logic.
These sensors offer different switching points to meet a variety of application needs. The A1421LK provides a zero crossing; the A1422LK includes precision settings and equalization switching points; the A1423LK has strong shock resistance and a wide set of switching points.
These three gear sensors with a single IC switch and two integrated Hall inverters sense changes in the magnetic field and differentially amplify through on-chip electronics. The monolithic IC switches included in the three devices are used to respond to changes in the differential magnetic field produced by moving ring magnets or irons with magnets behind. Differential sensing provides resistance to radial vibrations that occur in the working air gap of the device due to changes in common-mode signals.
Steady-state system compensation is eliminated with an on-chip differential bandpass filter that is immune to electromagnetic interference. These sensors utilize the advanced temperature compensation, sensitivity, and Schmitt trigger switching points of the high-pass filter to ensure optimal operation up to low frequencies over a wide range of air gaps and temperature ranges.
Vacuum forming display rack is one of the props. It has a unique appearance, powerful functions, and also has advertising effects to achieve better profitability.
Vacuum forming display is the image of a customer's product and sometimes the only point of sale or promotional product that comes into contact with the customer. Therefore, your vacuum forming display must be outstanding,eye-catching, and durable.
Yiyongli can design and produce any type of vacuum formed display rack, using vacuum forming technology combined with spraying, screen printing, and stickers to achieve unique effects. The materials used are mostly ABS and acrylic, and can be customized for exhibition racks, clothing display racks, food display racks, lubricating oil display racks, toy display racks, digital product display racks, daily necessities display racks, information display racks, jewelry display racks, promotional display racks and cosmetics display racks, etc.
Vacuum Forming Display Rack,Vacuum Forming Display Stand,Vacuum Forming Plastic Display,Vacuum Forming Comestic Display,Vacuum Forming Display
Dongguan Yiyongli Industrial Co.,Ltd. , https://www.absthermoforming.com