Automatic Horizontal Expander for Tube Expanding

Automatic Horizontal Expander by Servo. The advantage: Full-Automatice Program, Automatic Shift by Servo, 1~n tubes process at one time. 

Characteristic:

1.Horizontal Expander Machine with Servo Driven for Up & Down direction movment for Heat Exchanger Coil Expanding In Row Direction; 

2: Horizontal Expander Machine with Servo Driven for left & Right direction movment for heat exchanger coil holes directioin opreation automatically;

3:Horizontal Expander Machine working Tube O.D.5MM ~ O.D.15.88 for Option

4. Horizontal Expander Machine are all processed by automatically without operator. Automatic Horizontal Expander by Servo. The advantage: Full-Automatice Program, Automatic Shift by Servo, 1~n tubes process at one time. 

Characteristic:

1.Horizontal Expander Machine with Servo Driven for Up & Down direction movment for Heat Exchanger Coil Expanding In Row Direction; 

2: Horizontal Expander Machine with Servo Driven for left & Right direction movment for heat exchanger coil holes directioin opreation automatically;

3:Horizontal Expander Machine working Tube O.D.5MM ~ O.D.15.88 for Option

4. Horizontal Expander Machine are all processed by automatically without operator.

Straight Line Wire Drawing Machine

LZ8/400 straight line wire drawing machine(MIG from 2.0 to 0.8mm)

One: main technical parameters

1. The maximum feed-in of the straight type:≤Ф2.0 mm

2. Tensile strength: ≤750Mpa

3. Material rod:ER50S-6 ER70S-6 and so on.

4. Minimum outlet diameter:Ф0.8mm

5. Equipment center height; 900mm

6. Synchronous take-up of spool, with tension frame

7. Wire drawing speed: 20-22m/s, normal drawing speed: 18m/s

Two: Equipment composition:

800 spool pay-off + LZ8/400 straight line wire drawing machine + degrease cleaning machine+tension stand + 630 spool take-up

A: 800 spool pay-off

B: LZ8/400 wire drawing machine

1: Fully enclosed type, with dust removal port, noise ≤82db, fast speed

1) Motor: â‘ Host: 8-15KW motor

2) Block : ① Block diameter: Ф400mm of straight type

â‘¡ Material of reel: ZG45~55 steel,

The straight line wire drawing machine can process the MIG welding wire,carbon wire,flux cored wire and other alloy wire and so on.

2.OPERATION VOLTAGE: 220/400V 50 CYCLE

3.THE FIRST YEAR IS FREELY SERVICE(BUT EXCEPT THAT BREAK THE MACHINE OR PARTS DELIBERATELY),THE SECOND AND THIRD YEAR JUST PAY THE PARTS COST

THE SELLER MUST OFFER THE LIFE-TIME SERVICE TO ALL MACHINE LINE.

4.THE SELLER MUST GUARANTEE TO PRODUCE THE GOOD QUALITY FINISHED WIRE.

Straight Line Wire Drawing Machine,Straight Line Drawing Machine,Straight Line Stainless Steel Drawing Machine,Stainless Steel Wire Drawbench

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com