Shandong Baoding wheel excavator manufacturer recently officially released the BD95W-9A wheeled excavator. The excavator adopts intelligent electronic throttle design to match the Yuchai Guosan EFI engine model and the new imported hydraulic system. It is mainly used for wheeled excavators with high requirements for comfort, flexibility and efficiency at home and abroad. Mainly applicable to urban greening construction projects, water conservancy construction projects, versatility is still the main feature of this product.
Baoding BD95W-9A wheeled excavator
Baoding new wheeled excavator 95 model product introduction:
The power of the wheeled excavator adopts the EFI supercharged engine. The emission meets the national non-road machinery Ill stage emission requirements, supports the duty-free traffic photography customer demand, and adopts the unique intelligent matching technology. The overall oil consumption can be reduced by 10%, 15 %.
Baoding's new 95-wheel excavator hydraulic system adopts a new and improved model imported variable displacement piston pump system, which has been tested by the field customers for a long time. The response is good.
The special 8T reinforced engineering bridge is used in the lower part, which strengthens the solid value of the transmission part compared with the previous generation.
Longitudinal hinged balance cylinders and nowadays common use of balance bars can work in more severe environments and are less prone to mechanical failure.
The cab has improved the noise reduction and noise reduction capability of the cab, matched the air-conditioning system, and has a wide field of vision. The electronic button control can quickly open the work after the trip. (This article is from Baoding)
A heat sink is a device that incorporates a fan or another mechanism to reduce the temperature of a hardware component (e.g., processor). There are two heat sink types: active and passive. The picture is an example of a heat sink with both active and passive cooling mechanisms.
More services we offer:
Besides of Metal Stamping Components,the Amplifiers metel chassises and Panels, we also complete solution for OEM/ODM Products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, PVC Fittings ,pvc conduit fittings, Plastic Injection Components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.
Product description:
The material used partly determines the extent of thermal conductivity. Copper and aluminum are the most widely used materials, though aluminum is the more common choice because copper is more expensive and heavier. Aluminum 6061 and 6063 are widely used with a thermal resistance of 166 and 201 W / mK, respectively.
Mosfet Heatsink,Aluminum Alloy Mosfet Heatsink,1000W Mosfet Heatsink,High Voltage Mosfet
Timeplex Industrial Limited , https://www.timeplexhks.com