- Model NO.: T-862++
- Specification: 220V / 110V AC 50--60HZ
- HS Code: 85151100
- Trademark: Puhui
- Origin: Tai′an City, Shandong Province, China
1. Locate, choose and attach the appropriate lens:
The usable of the lenses diameter are 28mm, 38mm, 48mm.
(1)When the area of the chips is below 15mm*15mm, please choose the IR-lamp temperature about 160-240, and choose the lens which D=28mm to avoid destroying other places, usually it will take you about 20-40seconds.
(2)When the area of the chips is between 15mm*15mm and 30mm*30mm, please choose the IR-lamp temperature about 240-320, and choose the lens which D=38mm to avoid destroying other places, usually it will take you about 30-60seconds.
(3)When the area of the chips is above 30mm*30mm, please choose the IR-lamp temperature 350(Attention: you should turn on the pre-heat dish first, and set-up the temperature about 150-200,wait 3-5minutes to allow the temperature steady on the set-up temperature),and choose the lens which D=48mmto avoid destroying other places, and keep the lamp body direct light. You should control the time carefully to avoid burning the chips.
Gildemeister Glass Cutting Machine is mainly used for flat sheet glass cutting work .Machine choose diamond cutting tools for the job .With the precise CNC controller help ,it allows us to cut the raw glass sheet into different shapes according to work request .All the place need a flat glass such as building ,window ,mirrors ,decoration glass ,glass display cabinet etc .
Our CNC Glass cutting machine has Small Glass Cutting Machine,Multiple Heads Glass Cutting Machine ,Automatic Glass Cutting Machine etc .
Glass Cutting Machine Automatic,Glass Cutting Machine Laser,Glass Cutting Machine Manual,Glass Cutting Machine Small
Jinan Rapid CNC Machinery Co.,LTD , https://www.jnrapidcnc.com