Current situation and development trend of China 's industrial pump industry

China's industrial pump industry, centrifugal oil pump accounted for 70%, centrifugal pumps, rotary and reciprocating positive displacement pump 1 accounted for 8%. Visible centrifugal pump products occupy the most important position. In recent years, the annual growth rate of domestic pumps ranging from 11% to 12% is higher than that of the world economic growth rate, thanks to the gradual maturity of the domestic market and the expansion of domestic demand.

According to statistics, China must pump more than 2,000 manufacturers. All pumps produce 450 series, more than 5000 varieties. The main domestic pump design, production. Since the 1980s China introduced more than 100 series and more than 2,000 varieties, which not only greatly affected the domestic backward pump market, but also reduced the gap with foreign products. In addition, with foreign joint ventures and cooperative production mode, the key pump technology in China is close to the advanced level of similar foreign products.

Judging from the current situation, the domestic WRY thermal oil pump manufacturing industry consists of three parts. These three parts are state-owned enterprises transformed by the shareholding system, joint-stock companies controlled by foreign capital and joint ventures and a large number of private-owned enterprises. From the sales performance analysis in recent years, among the best pump manufacturers, was a large private pump factory. They are not only among the high end of the pump manufacturing industry, becoming the backbone of the pump manufacturing industry, but also have the ability to develop. However, a large number of small and medium-sized private-owned enterprises are still in the bottom position of the industrial chain. If they do not make progress and do not think of joint development, they will be unsustainable for a long time. Although the state-owned enterprises after the joint-stock reform have struggled for quite some time, Integration, restructuring has gradually come out of the trough, as the pump manufacturing industry is an increasingly strong force; joint ventures and foreign-controlled, or even wholly-owned enterprises, has now occupied an important position in the domestic pump manufacturing industry. Some of the original large-scale state-owned enterprises with its market, land and human resources in exchange for the foreign pump manufacturing technology shares. On the one hand, this has enabled us to rapidly increase the level of certain key pumps and also make these joint ventures or foreign-funded enterprises themselves rapidly gain popularity in China. However, it should be noted that most of the pumps manufactured by these enterprises are still in the normal manufacturing category of pumps, and the really much-needed high-end products still need to be imported from abroad.

Domestic pump industry so far has not formed a real brand. The development of the pump mainly depends on the domestic strong demand. Due to strong domestic demand in the next few years, there is room for development of the domestic pump industry. But the competition is fierce, including competition with foreign pump industry. Due to the gradual loss of comparative advantages of the domestic pump industry and the deterioration of the export conditions, the export of the pump is expected to be suppressed. Pump products are expected to diversify, supporting capacity will be further improved.

Due to the fact that the domestic policy of encouraging domestic-made new products is for the first time made by the government, it is expected that the high-end pumps urgently needed by China will be strongly promoted. Some new products, such as energy-saving and environment-friendly electromagnetic heat pumps, will be promoted under the guidance of the policy. Pump design level and advanced manufacturing technology will be further enhanced in the large pump factory, the combination of the two technologies will give the pump manufacturer a qualitative leap. As mentioned earlier, domestic Wuyin heat pump industry intensified competition, so that some not on the scale of the pump manufacturers and technology can not keep up with the requirements of enterprises will be phased out.

The future demand for domestic pump products are mainly concentrated in the following areas:

Environmental Protection Industry: The State intends to invest heavily in the construction of sewage treatment plants and construction of industrial wastewater treatment plants.

Water Supply Project: The South-to-North Water Diversion Project and its branch water supply project are still projects that are urgently promoted in China.

Power Plant: Some parts of China are still in short supply. The construction of new power plants is inevitable. Therefore, power plant pumps still have strong demand.

Petroleum and Petrochemical Industry: The future of petroleum and petrochemical industry, China still has huge space for development. Therefore all kinds of petrochemical and oil pump needs in China.

Farmland water conservancy construction and national policies to benefit the rural areas, farmland water conservancy construction will certainly increase more quickly. This is a key area of ​​demand.

The first 2015 months, the domestic economy is still strong development, all walks of life pump demand is still strong. Therefore, depending on domestic demand, there is still room for development in China's industrial pump industry.

Wedding embroidery Fabric

Our company focus on producing&sales,chemical voile lace,wedding lace fabric.organza embroidery fabric,chiffon embroidery fabric.mesh embroidery fabric,lace trim and patches&lace accessories

Product Description

Application:

Wedding Embroidery Fabric,3D Embroidery Fabric,Beaded Mesh Fabric,Embroidery Tulle Fabric Lace

DONGGUAN SHITAI ACCESSORY TEXTILES CO.,LTD , https://www.stsewingcraft.com