--Specification:L: 32m   W: 6m   spacing: 1.2m    all 26
--type:Four felt belt drive.
--Total power: 43KW
--Air consumption: 1m³/,0.4-0.7MPa
. Initial table
--Dimensions:L7000×W530 ( equipped with clamp)
--Felt roller with high transmission:70×50×400mm Roller spacing:400mm  Temperature:600ºC
--Saws with manual break,With aluminum scrap recycling bins
--Air-cooled devices: the top with a long nozzle fan 0.37kw 8setsÂ
. Run-out table ( hydraulic lift) folded plate
--Dimensions:L32000×W530×H850mm
--Felt roller with high transmission:96×76×400mm Each cell 3 Roller spacing:400mm  Temperature:500ºC
---- Axial fan with the number: 10, 180W / Taiwan;
--Hydraulic lifting device 1 set;power: 4KW
Metal filler is a material used to fill chemical equipment such as tower reactors, adsorbers, and distillation towers. They are usually made of metal wires, wire mesh, or metal sheets, with a high surface area and open pore structure, which can increase the contact area and reaction rate of chemical reactions or adsorption processes. Metal fillers are typically used in the following areas:
1. Distillation: Metal fillers can improve the efficiency and output of distillation towers, reduce energy consumption and operating costs.
2. Adsorption: Metal fillers can be used to prepare various adsorbents, such as activated carbon, molecular sieves, etc., for adsorption and separation of impurities in gases or liquids.
3. Reaction: Metal fillers can be used for catalytic reactions, such as preparing synthesis gas and cracking hydrocarbons.
4. Mass transfer: Metal fillers can be used for mass transfer processes, such as gas absorption, extraction, etc.
The advantages of metal fillers include high surface area, open pore structure, good mass transfer performance, good corrosion resistance, and easy cleaning and maintenance.Metal Structured Packing Column Structured Packing,Wire Mesh Structural Packing,Ceramic Corrugated Structured Packing,350 Y Structured Packing
Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com