Technical data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material |  EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature | -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US
 Founded in 2001, we are specialized in design & manufacture stainless steel valve for industrial fluid control system. Our products include pneumatic angle seat valve, shuttle valve, ball valve, butterfly valve, pressure reducing valve, steam trap, check valve and strainer, which are widely exported to USA, Europe, Asia, Africa, in total 62 countries
Technical data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material |  EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature | -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US
Â
Boride-based powders are commonly used in thermal spray applications due to their high hardness, wear resistance, and thermal stability. Some commonly used boride powders for thermal spray include:
1. Boron Carbide (B4C): Boron carbide is one of the hardest materials known, making it ideal for applications requiring high wear resistance. It also has excellent chemical resistance and thermal stability.
2. Titanium Diboride (TiB2): Titanium diboride offers a combination of high hardness, excellent wear resistance, and good thermal conductivity. It is often used in applications where both wear and heat resistance are required.
3. Tungsten Boride (WB): Tungsten boride powders have high hardness, excellent wear resistance, and good thermal stability. They are commonly used in thermal spray applications for their ability to withstand high temperatures and resist wear.
4. Chromium Boride (CrB2): Chromium boride powders offer high hardness, wear resistance, and good thermal stability. They are often used in thermal spray coatings for applications requiring resistance to abrasion and erosion.
These boride-based powders can be used in various thermal spray processes such as plasma spraying, high-velocity oxy-fuel (HVOF) spraying, and detonation gun spraying to provide protective coatings on surfaces that require enhanced wear resistance and thermal protection.
Boride Powder,Nickel Boride Powder,Chromium Boride Powder,Thermal Spray Materails
Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com