SD-5142
Specifications:Â
Â
| Throat Diameter: | 1 in (25mm) |
| Mounting Type: | Screw on 1 3/8″or Bolt-on |
| Nominal Impedance: | 8 Ohm |
| Power Capacity: | 60Watts RMS(pink noise signal -12db/OCT) |
| Sensitivity(1W/1M): | 109dB |
| Frequency Range: | 1.2KHz-20KHz |
| Diaphragm Material: | Titanium |
| Voice Coil Diameter | 2.03 in(51.6mm) |
| Voice Coil Material | Round&Round Aluminium Wire |
| Flux Density: | 1.75T |
| Magnet: | Strontium Ferrite |
| outer diameter: | φ134mm |
Our Competitive Advantages
Well and High Quality Control ,
Prompt Delivery ,
Competitive Prices ,
Small Order Acceptable ,
OEM Order are acceptable. Driver unit titanium speaker tweeter
SD-5142
Specifications:Â
Â
| Throat Diameter: | 1 in (25mm) |
| Mounting Type: | Screw on 1 3/8″or Bolt-on |
| Nominal Impedance: | 8 Ohm |
| Power Capacity: | 60Watts RMS(pink noise signal -12db/OCT) |
| Sensitivity(1W/1M): | 109dB |
| Frequency Range: | 1.2KHz-20KHz |
| Diaphragm Material: | Titanium |
| Voice Coil Diameter | 2.03 in(51.6mm) |
| Voice Coil Material | Round&Round Aluminium Wire |
| Flux Density: | 1.75T |
| Magnet: | Strontium Ferrite |
| outer diameter: | φ134mm |
Our Competitive Advantages
Well and High Quality Control ,
Prompt Delivery ,
Competitive Prices ,
Small Order Acceptable ,
OEM Order are acceptable.
Shell and Plate Heat Exchanger
A shell and Plate Heat Exchanger is typical heat exchanger consists of a series of stacked plates and enclosed in a container shell. The plates are arranged in a chevron pattern, with each plate having its own inlet and outlet ports. Heat is transferred between the two fluids as they flow through the plates and shell respectively.
Shell and plate heat exchangers are used in particularly industrial plant. They are those require larger surface area and higher heat transfer coefficient, while at the same time, of high temperature and pressure.
In addition to their efficiency and compact size, shell and plate heat exchangers are also flexible in terms of material selection. Constructing material could be carbon steel, AISI 304, AISI 316L, AISI 904L, 254 SMO, Ti, Hastelloy, and more based on various operations.
Features of shell and plate heat exchanger are:
Gasket free
Stable and safe structure
Special seal structure for preventing media by-pass
High heat transfer efficiency
Shell And Plate Heat Exchanger,Plate Shell Heat Exchanger,Shell Plate Type Heat Exchanger,Welded Plate Shell Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com