The instruction of Composite FRP Winding Pipe Line:
1. Resin feeding system(include the reisn tank with agitator,the pump,the Chain and pipe to offer the resin automaticly)
2. Lining making machine(the platform,the vehicle,the machine head and tail)
3. Pipe winding machine(the pipe winding platform,the vehicle,the resin bath,the machine head and tail)
4. Curing station(machine head and tail)
5. Trimming machine(machine head and tail)
6. Demoulding machine(the Longmen type or the chain type for small machine)
According to the pipe diameter,we have different filament winding machine models:
FW-300(DN30-300mm)
FW-500(DN50-500mm)
FW-1000(DN200-1000mm)
FW-2000(DN500-2000mm)
FW-3000(DN500-3000mm)
FW-4000(DN800-4000mm)
      You can choose the machine according to your demand (diameter 30-4000mm).We can sell you the whole set machine and any part of it.We have our own R&D department,who design the control systems and programs,and improve the technology year by year. Â
      If you buy our machine, we can offer the whole scheme to produce the FRP GRP GRE pipe so that  you can establish the plant.
Â
1. Used composite material to wind pipe for energy transport, industrial water, drinking water, drainage and irrigation system
Â
2. The machine is highly automatic and PLC control system
Â
3. High Production speed and raw material utilization, low costÂ
Â
4. Adopts discontinuous winding technologyÂ
Â
5. Good working condition and stable performance
Â
6. Stable pipe quality and easy connection of bell and spigotÂ
Â
1. Warranty period: 12 months
2. Spare parts: Non-artificial damage parts, during warranty period, can be provided free of charge
3. Testing and debugging: Every machine will be tested and debugged before shipment
4. Training and maintaining: Sending our engineer to your factory or sending your machine operator to our factory
FAQ
Â
A:Just tell me what kind of product you want to make, and IÂ will give suggestions according to it.Â
Q:How do IÂ know the output range?
A:I will need size information (length, width, height) to calculate the weight of the product. And give suggestions due to the products for you.
Q:How to get more information about the machine ?
A: Contact information is displayed below. IÂ would give the answers ASAP.Â
Â
Â
Light Girder Suspension Crane
Maximum load: 2000kg
Used to transfer materials overhead, our Light Girder Suspension Crane is especially suitable for use in workshop that have low ceilings as well as factories and sites made of lightweight steel frames where the bridge Crane reaches its limit.
The modular design contains fewer standard parts that make crane assembly as easy as stacking blocks. With these modular parts, users can reassemble a new crane, according to the change in lifting requirements of the alterations made to the workshop.
Due to the ultra-light weight of the crane, there is little friction between the trolley wheel and the rail. Easily moved by hands, this suspension crane can move clumsy, heavyweight workpiece in a fast manner. Available also with the mechanical electrical chain hoist, hoist drive, electrical control device, and matched system, the crane requires limited maintenance and has a long service life.
This series of crane can run on both straight and curved rails. By using many other modular parts, it can be reassembled to become the single-girder or double-girder crane. Each of the modular parts is bored to the standard connector for its size. So the crane can be adjusted according to the layout of the worksite, in order to suit the specific material handling requirement and satisfy customer specific needs.
Optional Parts
Aluminum rail
Railway turnout
Elevating platform
Power supply device
Electrical travel drive system
Light Crane,Flexible Combined Crane,Light Combined Crane,Light Duty Overhead Bridge
Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com