Company Name Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd.
★Product Name Fuel Truck★Product Model CSC5071GJYJH5
Vehicle parameters
★Dimensions (length × width × height) mm 5990 × 1950 × 2500
★The size of the cargo compartment panel (length × width × height) mm or volume m3 4.82
★Preparation quality kg 3950 ★Total mass kg 7360
★Drive type 4X2
Chassis configuration and technical parameters
★Chassis manufacturer Anhui Jianghuai Automobile Co., Ltd.
★ Chassis type HFC1071P92K5C2ZV
★ Engine manufacturer Weichai Power Yangzhou Diesel Engine Co., Ltd.
★Engine model WP3Q130E50
★Transmission model LC6T450M1
★Main reducer speed ratio (drive axle speed ratio) 4.330
★ tire specifications model 7.00R16
★Comprehensive fuel consumption L/100km 15.6
★ 50km/h no-load constant-speed fuel consumption L/100km 10.2
Jianghuai Guowu refueling car announcement has been issued!
Vehicle model: Chusheng CSC5071GJYJH5
Chassis model: HFC1071P92K5C2ZV
Chassis configuration: JAC Jin Junling 1900 wide body cab, Weichai 130 horsepower engine WP3Q130E50, 6-speed gearbox, 700R16 steel wire tire, moving, original front plate, ABS, speed limit, driving recorder, exhaust auxiliary, slow speed The device, the front of the exhaust pipe, the swallow-tail type 6000-ton stamping machine is stamped and formed, and the paint adopts cathodic electrophoresis technology.
[Jianghuai Guowu fuel truck main technical parameters]
Product trademark Chusheng
Announcement batch 288
Product Name CSC5071GJYJH5 Fuel Truck
Product No.ZM96959902K
Total mass (Kg) 7360
Tank volume (m3) 4.82
Rated load mass (Kg) 3215
Dimensions (mm) 5990×1950×2500
Curing quality (Kg) 3950
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 18/17
Front overhang / rear overhang (mm) 1085/1597
Number of axes 2
Wheelbase (mm) 3308
Axle load (Kg) 2360/5000
Maximum speed (Km/h) 80
Other 1, transport medium: gasoline, category number: 3, density: 700 kg / cubic meter; effective volume of tank body 4.82 cubic meters; tank dimensions (length × long axis × short axis) (mm): 1 tanker Side mounted on the left or right side of the frame: 4000 × 1700 × 1060, 2 tanker installed in the front of the tank: 4000 × 1750 × 1260 (the length of the tanker 800); optional folding fence on the top of the tank; optional Curved fenders. 2, the side protection is cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 300mm, a section width of 50mm, and a lower edge of 500mm from the ground. Tanker model and manufacturer: BL1111Z/Zhuhai Beiling Fuel Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokent Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Henghe Jiahua Technology Co., Ltd. (Shanghai Bolai Machinery) Ltd.),SK20QF-111A,SK20QF-222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ, JSK-70B1121C, JSK45B1121C/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd., ZH6444/Foshan Zhongze Electromechanical Technology Co., Ltd. 3. Only use the radial tire, the speed limit device and the chassis of the front disc brake; the vehicle should be equipped with a tachograph with satellite positioning function. ABS model/manufacturer: CM4XL-4S/4M / Guangzhou Kemi Automotive Electronic Control Technology Co., Ltd.
Environmental Notice:
Pa Pe Barrier Film,7 Layer Coextrusion Film,Coextrusion Thermoforming Film,Multi Layer Coextrusion Film
Changxi Packaging Technology(Yixing) Co.,Ltd , https://www.changxipackaging.com