On July 13-15, KUKA, the world's leading supplier of industrial robots, appeared at the Shanghai New International Expo Center and became a highlight of Propak China 2011. At the show, Kukad highlighted the high-performance “stacking experts†KR 180-2 PA, KR 470 PA two robots and the KUKA Motion Control System (KMC).
As an industrial robot supplier, KUKA has long been committed to simplifying the development of robots in all aspects. A new generation of robots makes automation simpler: easier to plan, easier to integrate, easier to operate, easier to maintain, and easier to meet specific customer needs. In addition, as a robotics leader from Germany, KUKA also shows people how to make robots safer and more energy efficient.
The KUKA KR 180-2 PA is a four-axis palletizing robot with a stacking height of 3,200 mm and a payload capacity of 180 kg. It is known as the “stacking expert†by the industry. The robot has a fifth passive shaft and a unique FEM-optimized motion structure that ensures efficient stacking. The arm of the KUKA KR 180-2 PA is made of carbon fiber composite CFK with low moment of inertia and high acceleration values.
The KUKA KR 470 PA is a five-axis palletizing robot with a maximum working range of 3,150 mm, a payload capacity of 470 kg and an additional load capacity of 50 kg, making it easy to package, pick and load pallets. Through the combination of KUKA stacking robots, help customers achieve any stacking solution. At the same time, its compact size, light weight and built-in and fixed components make it easy and quick to integrate into automation equipment.
The KUKA Motion Control System (KMC), which was exhibited with the KR 180-2 PA and KR 470 PA, is also unusual in that it can automate robots, all machines and motion systems according to individual needs; KMC Modular Its structure makes it possible to expand hardware and software according to the customer's individual needs; at the same time, the use of its portable KUKA Control Panel (KCP) can bring high comfort and flexibility to customers... In short, Customers are free to use the system's control modules to combine any of the required components and ultimately achieve two advantages: lower cost and greater functionality.
1. The cutting speed of the board divider can be set to high or low.
2. Maximum travel of knife wheel: 600mm.
3. Knife wheel micro-adjustment: 0-2mm.
4. Adjustable lower board knife: 0-50mm.5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.
PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com