LED filament bulb lamp brings us back to the era of incandescent tungsten lamp, which really makes the LED bulb achieve 360 ​​degree illumination, and the high voltage and low current heat is small, the driving power supply efficiency is high, the glass casing is not hot, and the light decay is also Small, it is a very creative product of the light source class. The country is in the environment of disabling incandescent lamps. This kind of LED filament bulbs is energy-saving, environmentally friendly, and the prospects must be very good. I hope that this product will not be dominated in the past three or two months. LED filament lamps are fully understandable by consumers. The LED filament lamps are similar in appearance to the incandescent lamps used in the past, and cater to the needs of some consumers with nostalgic feelings. In addition, LED filament lamps are quite eye-catching in the field of European lamps and crystal lamps, and may even occupy a part of the market share. At this stage, the price of LED filament lamps is relatively high, and the quality and technology of the products are not mature and unstable. As a result, the LED filament lamps often have no obvious advantages when they are subjected to market inspection, and they are not fully recognized by the market. However, the product quality of the LED filament lamp gradually matures, and with the continuous generation of new technologies and new materials, the filament-type LED becomes a high-quality and low-cost grounding gas, and the LED filament lamp will exert its huge advantage and become a consumer. One of the favored products. From the market point of view, LED filament bulbs have reduced the cost of LED lamps with the development of technology, thereby enhancing the competitive advantage of LED lamps and traditional lamps, which is conducive to LED lighting entering ordinary households. On the other hand, LED filament bulbs are fully in line with consumer habits of lighting fixtures. This is why consumers choose LED filament bulbs. In today's market where incandescent lamps and energy-saving lamps dominate the market, as a revolutionary product, the impact of LED filament bulbs will gradually increase, and its market potential will become more apparent.
Precision Machining Parts
The precision machining we usually talk about generally refers to precision CNC Machining, CNC turning, CNC milling, CNC turning and milling composite machining, grinding, wire cutting, EDM machining, etc. The parts obtained by these machining methods can usually achieve relatively high precision and surface finish. Moreover, Precision Machining Parts has a wide selection of materials, and most materials can be used for CNC machining. Since the precision machining parts need to be machined one by one on the machine tool, the cost of mass production is relatively high compared with the parts that are directly formed by the mold. Of course, the most suitable and reasonable processing method to choose mainly depends on the product materials and the requirements of the product itself. SCZY has very rich experience in Precision Machining Parts and CNC Machining Parts ( They are included the stainless steel machining parts, aluminum machining parts, brass machining parts, titanium machining parts, plastic machining parts etc). Our normal machining accuracy can reach ±0.01mm, and for some special requirements, the accuracy can reach ±0.005mm (depending on specific products). We usually choose the most reasonable method according to the drawing requirements and recommend it to customers. Below are some pictures of precision machined parts for reference only.
Precision Machining Parts,Precision Machining Services,CNC Machining Services,CNC Machining Parts,CNC Services
Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com