Summarize:
1.LQRY Hot Oil Boiler Thermal Oil Hot Oil Pump is suitable for heat-conduction oil, or other hot oils with temperature ≤370°C
3.It's widely used in petroleum oil, chemical industry, rubber, leather, food industry, grease, boilers, construction, road maintenance, pharmaceutical, plastics, rubber, synthetic fiber textile, printing and dyeing and other industrial fields.
Â
Seal Type:
1.Using the combination in the form of the packing seal and the mechanical seal, packing with high temperature resistant filler material, has a good thermal adaptability.2.The mechanical seal: a high mechanical strength, good abrasion carbide material, guarantee the sealing performance under high temperature conditions.
3.Polytetrafluoroethylene (PTFE) do lip seal, the sealing performance leap than the rubber sealing reliability increased by 25 times, highly corrosion-resistant.
Â
Product details:
| Working Principle: | Centrifugal |
| Main applications:Â Â | Hot oil, thermal oil, high temperature oil, etc |
| Driver: | Electric motor, diesel motor. |
| Power Specs: | 220/380/400/415V 3phase;50hz/60hz |
| Max.permissible fluid temperature: | 370°C (698°F) |
| Type of connection: | Flange |
| Installation position: | Horizontal |
| Casing parts material: | Cast steel |
| Shaft seal type:Â Â | Shaft seal ring, Mechanical seal, Carbon seal |
| Free passage:Â Â | 1mm |
| Maximum viscosity: | 5X104C.S.T |
| Maximum drive rating:Â | 132KW (180HP) |
| Maximum caliber:Â Â | 150mm (6inch) |
| Maximum discharge-side pressure: | 0.85Mpa (8.5bar) |
| Maximum head:Â | 85m (278.8ft) |
| Flow rate range:  | 4.5-400m³/h(19.8-1760US.GPM) |
Â
Performance Data:
| Model | Capacity  (m3/h) |
Head (m) |
Speed (r/min) |
Shaft Power  (kw)  |
Motor Power (kw) |
| 26-20-100 | 4.5 | 15 | 2825 | 0.45 | 0.75 |
| 50-32-150 | 8 | 22 | 2900 | 1 | 1.5 |
| 50-32-160 | 10 | 25 | 2900 | 1.5 | 2.2 |
| 65-40-160 | 12.5 | 25 | 2900 | 2.5 | 3 |
| 50-50-170 | 12.5 | 32 | 2900 | 3.2 | 4 |
| 65-50-180 | 32 | 32 | 2900 | 4.5 | 5.5 |
| 65-50-170 | 40 | 25 | 2900 | 4.5 | 5.5 |
| 80-50-180 | 40 | 40 | 2900 | 6.7 | 7.5 |
| 80-50-170 | 60 | 20 | 2900 | 6.7 | 7.5 |
| 100-65-190 | 60 | 38 | 2930 | 9.2 | 11 |
| 100-65-200 | 80 | 40 | 2930 | 12.5 | 15 |
| 100-65-220 | 58 | 50 | 2930 | 12.5 | 15 |
| 100-65-230 | 100 | 55 | 2940 | 19.5 | 22 |
| 125-100-190 | 155 | 30 | 2940 | 20 | 22 |
| 100-65-240 | 100 | 70 | 2950 | 25.5 | 30 |
| 100-65-257 | 100 | 80 | 2950 | 32.5 | 37 |
| 125-100-220 | 160 | 45 | 2950 | 25.5 | 37 |
| 125-80-250 | 160 | 60 | 2970 | 35.5 | 45 |
| 125-100-257 | 200 | 60 | 2970 | 42.8 | 55 |
| 125-100-260 | 260 | 70 | 2970 | 64.3 | 75 |
| 125-100-270 | 300 | 70 | 2970 | 75.3 | 90 |
| 125-100-270 | 220 | 85 | 2970 | 68 | 90 |
| 150-125270 | 340 | 76 | 2970 | 89.5 | 110 |
| 150-125-270 | 400 | 78 | 2970 | 106 | 132 |
Â
Â
Company Information:Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.Â
Summarize:
1.LQRY Hot Oil Boiler Thermal Oil Hot Oil Pump is suitable for heat-conduction oil, or other hot oils with temperature ≤370°C
3.It's widely used in petroleum oil, chemical industry, rubber, leather, food industry, grease, boilers, construction, road maintenance, pharmaceutical, plastics, rubber, synthetic fiber textile, printing and dyeing and other industrial fields.
Â
Seal Type:
1.Using the combination in the form of the packing seal and the mechanical seal, packing with high temperature resistant filler material, has a good thermal adaptability.2.The mechanical seal: a high mechanical strength, good abrasion carbide material, guarantee the sealing performance under high temperature conditions.
3.Polytetrafluoroethylene (PTFE) do lip seal, the sealing performance leap than the rubber sealing reliability increased by 25 times, highly corrosion-resistant.
Â
Product details:
| Working Principle: | Centrifugal |
| Main applications:Â Â | Hot oil, thermal oil, high temperature oil, etc |
| Driver: | Electric motor, diesel motor. |
| Power Specs: | 220/380/400/415V 3phase;50hz/60hz |
| Max.permissible fluid temperature: | 370°C (698°F) |
| Type of connection: | Flange |
| Installation position: | Horizontal |
| Casing parts material: | Cast steel |
| Shaft seal type:Â Â | Shaft seal ring, Mechanical seal, Carbon seal |
| Free passage:Â Â | 1mm |
| Maximum viscosity: | 5X104C.S.T |
| Maximum drive rating:Â | 132KW (180HP) |
| Maximum caliber:Â Â | 150mm (6inch) |
| Maximum discharge-side pressure: | 0.85Mpa (8.5bar) |
| Maximum head:Â | 85m (278.8ft) |
| Flow rate range:  | 4.5-400m³/h(19.8-1760US.GPM) |
Â
Performance Data:
| Model | Capacity  (m3/h) |
Head (m) |
Speed (r/min) |
Shaft Power  (kw)  |
Motor Power (kw) |
| 26-20-100 | 4.5 | 15 | 2825 | 0.45 | 0.75 |
| 50-32-150 | 8 | 22 | 2900 | 1 | 1.5 |
| 50-32-160 | 10 | 25 | 2900 | 1.5 | 2.2 |
| 65-40-160 | 12.5 | 25 | 2900 | 2.5 | 3 |
| 50-50-170 | 12.5 | 32 | 2900 | 3.2 | 4 |
| 65-50-180 | 32 | 32 | 2900 | 4.5 | 5.5 |
| 65-50-170 | 40 | 25 | 2900 | 4.5 | 5.5 |
| 80-50-180 | 40 | 40 | 2900 | 6.7 | 7.5 |
| 80-50-170 | 60 | 20 | 2900 | 6.7 | 7.5 |
| 100-65-190 | 60 | 38 | 2930 | 9.2 | 11 |
| 100-65-200 | 80 | 40 | 2930 | 12.5 | 15 |
| 100-65-220 | 58 | 50 | 2930 | 12.5 | 15 |
| 100-65-230 | 100 | 55 | 2940 | 19.5 | 22 |
| 125-100-190 | 155 | 30 | 2940 | 20 | 22 |
| 100-65-240 | 100 | 70 | 2950 | 25.5 | 30 |
| 100-65-257 | 100 | 80 | 2950 | 32.5 | 37 |
| 125-100-220 | 160 | 45 | 2950 | 25.5 | 37 |
| 125-80-250 | 160 | 60 | 2970 | 35.5 | 45 |
| 125-100-257 | 200 | 60 | 2970 | 42.8 | 55 |
| 125-100-260 | 260 | 70 | 2970 | 64.3 | 75 |
| 125-100-270 | 300 | 70 | 2970 | 75.3 | 90 |
| 125-100-270 | 220 | 85 | 2970 | 68 | 90 |
| 150-125270 | 340 | 76 | 2970 | 89.5 | 110 |
| 150-125-270 | 400 | 78 | 2970 | 106 | 132 |
Â
Â
Company Information:Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc.Â
The hollow brick machine is a brick machine used to produce hollow blocks. The blocks produced by the brick machine do not need to be burned, and can be used after natural curing to reach a certain strength. The hollow non-burning brick machine has the characteristics of structure, high pressure, high yield, strong rigidity, good elasticity, fully enclosed automatic circulation lubrication, and automatic quantitative feeding. The main raw materials for the production of hollow brick machine come from river sand, fly ash, slag, tailings, gangue, etc. It can press cement bricks, refractory bricks, and non-fired bricks. The pressed bricks fully comply with national standards. National construction needs and has significant social benefits. The use of this equipment and process technology can turn waste into treasure, save energy and reduce consumption, protect land, save cultivated land, and benefit after it is of great significance. Using this equipment will bring you surprises and Considerable economic benefits.
The advantage of using hollow non-burning brick machine: the production raw materials use factory waste, fly ash, construction waste and other waste materials, which replaces the traditional brick machine production and use a large amount of land, because the hollow brick protects the precious land of our country, and at the same time realizes the renewal Utilization, and the performance of hollow bricks is more suitable for construction use than clay bricks, which is why the country also advocates the development of the hollow brick market.
The hollow brick machine is a brick machine used to produce hollow blocks. The blocks produced by the brick machine do not need to be burned, and can be used after natural curing to reach a certain strength. The hollow non-burning brick machine has the characteristics of structure, high pressure, high yield, strong rigidity, good elasticity, fully enclosed automatic circulation lubrication, and automatic quantitative feeding. The main raw materials for the production of hollow brick machine come from river sand, fly ash, slag, tailings, gangue, etc. It can press cement bricks, refractory bricks, and non-fired bricks. The pressed bricks fully comply with national standards. National construction needs and has significant social benefits. The use of this equipment and process technology can turn waste into treasure, save energy and reduce consumption, protect land, save cultivated land, and benefit after it is of great significance. Using this equipment will bring you surprises and Considerable economic benefits.
Hollow Block Machine,Maunal Hollow Block,Hollow Brick,Hollow Block Making Machine
Zhengzhou SMART Machinery Manufacture Co.,Ltd , https://www.simamax.com