Also known as plumbing, road cleaning, high pressure cleaning, and sewer cleaning. The fence cleaning vehicle is mainly used for guardrail cleaning, cleaning of roads, square pavements, sewers, pipeline sediments, dead mud mud dredge, can also be used for cleaning industrial drainage pipelines, walls, etc., city road barriers, roads on both sides of the wall Brushing. The fence cleaning vehicle can be equipped with sprinkler and sewage suction device, which integrates cleaning and suction. Can also be installed according to user needs high-pressure water pump, suitable for scouring the city of small advertising and scrub city sculptures.
Fence cleaning car use
It is used for cleaning the double-sided guardrails of highways and can be used for road surface spraying, greening and fire fighting operations.
Product performance characteristics:
1. Double brush interactive job design, high cleaning efficiency, fast operation, 3-5km per hour.
2. The special design device automatically maintains a constant distance between the cleaning brush and the guardrail board to ensure the quality, efficiency and safety of the cleaning.
3. High-pressure water flow design, high efficiency and water saving, washable fence 5-8km per ton of water.
4. Unique bristles design, cleaning does not leave dead ends, do not scratch the paint.
5, supporting the installation of a variety of car chassis, but also allows customers to increase the price of choice.
6, the use of safety, energy saving and environmental protection, stable and reliable.
◠Cleaning vehicle maintenance steps:Before cleaning, the body surface temperature should be cooled below 60°C, and the ambient temperature should be maintained at 0-40°C. The water spray head is more than 15 cm away from the body paint surface. The order of flushing is from the roof to both sides. When rinsing the grille part in front of the car, misty water flow should be used, and the water column should not be flushed against the fins of the water tank or condenser. If the plastic arch cover is installed at the mudguard, it should be removed and cleaned, and the mudguard should be thoroughly cleaned. , Fender inside.
1. It is to clear away the remains of the car body. You can use the all-round descaling water to wipe with a clean cotton cloth. Then wring out the dustless cotton cloth with the car wash liquid, dry the car paint along the direction perpendicular to the car's driving direction. Car wash on the surface. Finally, rinse the car wash thoroughly with plenty of clean water, and dry it with a synthetic sheepskin towel. Wipe dry to achieve the whole car water-free traces, glass stainless
2. The high-pressure water jet cleaning is to wash away the dirt contaminated on the car body surface from top to bottom with a high-pressure water jet head, then flush the rear part of the car body, and finally wash the lower part of the car. This step is to pay attention to the need to fully flush the chassis and thoroughly clean the edges, bends, fenders, etc. Particular care should be taken to thoroughly clean the sand and dirt from the wheels, brake discs, fenders, front grilles, door frames, and skirts.
3 is to wipe, use a car wash sponge shampoo car shampoo, wipe the body again, if contaminated objects are not easy to remove, you can repeatedly wipe, pay attention to wipe the body up and down the sponge to be used separately, so as not to scratch the body under the sand paint body paint. Then rinse with high-pressure water, in particular, to clean the seams at the car seams, foam at the corners, etc.
4. Apply liquid to spill the shampoo car wash on the body. There are two methods, one is to use multi-functional high-pressure foam washing machine, spray evenly, to the upper and lower regularly shaking nozzle; the second is manual preparation, that is, according to a certain proportion of shampoo car wash liquid, do not use washing powder, soapy water, Dewaxing detergent.
Box shear machine is horizontal structure, the equipment is driven by hydraulic pressure. Compared with mechanical shear machine, it has the characteristics of small size, light weight, small inertia, low noise,stable movement, flexible operation and large shear section. With the integrated control of hydraulic and electronics, single and continuous action conversion can be implemented, which is simple and convenient to use. In shearing, the material cut does not need manual support, as long as according to the shearing speed, the shearing material can be continuously added to the equipment bin.
1) Independent research and development, independent brand, mature technology.
2) Imported accessories, lower operating costs, higher quality, energy-saving and efficient.
3) Fully enclosed structure, high safety performance, low probability of work-related injuries.
4) Car-mounted mobile customization to meet the needs of changing sites.
5) Integrated installation-free, ready-to-use.
6) PLC control, manual automatic operation, automation free of manual work.
7) Electric power system and diesel system should be operated in a two-pronged way.
8) Cyclic design, long working hours, low human capital requirements.
9) Wide range of application, less restrictions on material delivery, high safety performance.
10) Independent design, long service life, high shear force.
Horizontal Shear, Horizontal Shearing Machine, Container Shear, Horizontal Metal Shear, Horizontal Scrap Shear
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycle.com