As with all products, bottle blowing machines also share the market segmentation of high school, low-end market. Today zyzhan Xiao Bian summarized the blower industry division for everyone, mainly including the following aspects:
High-end class: fully automatic blow molding production line, large profit margins, such as feeding, drying, scrap recycling, crushing and reuse, and branding, automatic completion of the whole process, and equipped with Leak Detector, in-mold labeling machine , automatic notching machine, conveyor belt, the wall thickness controller to control the distribution of product thickness, using well-known brand configuration. The entire automated production line, which is based on the blow molding machine, requires no manual operation from plastic raw materials to finished product packaging. These products are relatively expensive, with state-owned enterprises, more powerful consortia and brand-name companies as their main customers, which account for about 30% of the entire domestic blow-molding machine market and are continuing to rise. The automatic production line is the main development direction of the future blowing machine, and it is also the only way for each blowing machine manufacturing enterprise to make profits and realize branding.
Mid-range: Fully automated, moderately priced single-bottle blower This type of machine can still be equipped with wall thickness controllers, automatic take-out devices, in-mold labellers, and automatic notching machines, depending on customer needs. More well-known configuration, sales policy is flexible. Most of the domestic enterprises will be positioned at this level, and the selling prices will differ depending on factors such as production costs, sales policies, and corporate reputation. These mid-range models account for about 50% of the market share of the blower, and the market share of companies with relatively poor quality is decreasing.
Low-end categories: blower with low price but stable performance. Such blowers are currently based on pneumatic machines. Most manufacturers use home-made configurations. The models have translation/single-dual-die, four-module and Rotary-style, etc., whose sales targets mainly domestic and small- and medium-sized enterprises and individual businesses, account for approximately 20% of the market.
According to the analysis of market demand, the market prospects of large-scale blow molding machines are widely viewed today. Large-scale blow molding machines have high manufacturing costs, large capital investment, and large risks. They have a strength threshold. Currently, there are few companies that manufacture large-scale blow molding machines in China, and their competition is much smaller than that of small blow molding machines. Big.
Relevant companies should distinguish the blowing machine division criteria and produce corresponding products according to market demand so as to continuously meet the requirements of market development.
Description:
The ignition analyzer can be used to measure each cylinder speed of the car engine, high voltage ignition coil ignition voltage and the injection time of each cylinder. It is induction type, without dismantling any pats, you can test the general distributor type SPW and ignition coil type COP. It can dynamically display the parameters and display the maximum and minimum range.
1. Measures RPM
2. Measures spark volt
3. Measures spark burn time
4. Advanced microcontroller technology
5. No ground wire connections required
Functions:
1. Minimum and
Maximum functions (For COP and SPW modes)
It maintains a continuous record of the minimum and maximum readings of the
function currently selected. To display the Minimum and Maximum readings of the
main display, if not already selected press` Secondary Function/Capture` Button
momentarily. To reset the Minimum and Maximum readings, press the `Power
ON/OFF/Reset` button momentarily. These values are also rest when turning to
[0".
2. Spark KVOLT
Calibration function (For Cop mode only)
It requires the user to calibrate the instruments in order to measure spark
KVOLT in coil on plug and coil near plug ignition systems.
This calibration uses the measurement values obtained during the procedure to
find the optimal measuring parameters or a particular type of ignition module,
and compensates for differences in waveform and signal strength.
Once the Ignition Tester has been calibrated on one of the ignition modules of
the engine being diagnosed, all the subsequent measurement of spark KVOLT will
be relative to the calibration value.
Features:
1. Capacitive
pick-up
2. Flexible probe
3. Protective rubber holster
4. LCD display
5. Power ON/OFF/RESET button
6. Secondary Function/Capture button
7. Ignition system button
8. Main Function/Calibrate button
9. Engine Cycles button.
Ignition Tester
Ignition Tester,Ignition Coil Tester Tool,Ignition Coil Test,Ignition Spark Tester
Shenzhen Cartrend Technology Co, Ltd , http://www.cartrendthings.com