Net pass Nanchang airport terminal airport responds to passengers touch the fire button

Nanchang, April 18. On the morning of April 18th, some netizens posted a message on Weibo, claiming that the smoke from a terminal building at a foreign airport in Changbei, Nanchang, was reported to be on fire. Afterwards, a reporter from the China New Net reported from the Jiangxi Provincial Airport Group that the passengers accidentally touched the fire alarm button and the airport area automatically sprayed out the extinguishing gas. The scene did not catch fire.

At 10:11 a.m. this morning, the A2 fire-fighting sensor at the T2 terminal of the foreign airport in Changbei, Nanchang, alerted the fire-fighting system. The fire-extinguishing gas was sprayed on the 202 terminal, causing fog in the airport terminal. There was no open flame at the site.

After the incident, the airport started emergency procedures in a timely manner and opened the terminal exhaust system at 10:13. At 10:40, the fire extinguishing gas in the terminal building was discharged.

Nanchang Changbei Airport indicated that the gas emitted from the fire-fighting sensor device is a hot aerosol and is harmless to the human body. During the incident, the airport was operating normally and did not have any impact on passenger travel.

According to the current situation, preliminary determination of the cause of the accident is caused by the passenger touching the fire alarm button in error.

Next:Installation, use and regulation of marine diesel generator sets
Previous:The ancient Chinese mine turned into "downstream" like the Gallery of Time and Space