PE Multilayer Sheet Extrusion Production Line

High Quality Multilayer PE Sheet Manufacturing Machine



Its density, water absorption, coefficient of heat conducting and the coefficient of steam pervasion are all lower than other kinds of warm-keeping boards.

It is characterized for strong indensity, light material, airtight, anticorrosion, aging resistance and low cost and widely used in the fields of heat preservation industry and warm keeping of railway, high way, airport, square and house hold fitment.

Main technical parameter: PE free foamed board manufacturing machine
Length: 2440mm
Width: 1220-1600mm
Thickness: 3-16mm

The special designed T-type mould ensures a precise control to the thickness of the board.
The accurate temperature control (±1) can precisely control the plasticization process, thickness and smoothness of board.
The three-roller calendar adopts horizontal, vertical or 45°tilt type installation, with up-down lifting mode.
The thickness of board is controlled by screw and pressing roller in two directions.
The separate roller temperature control system can precisely control the pressing roller temperature to ensure a even thickness.
Cutting machine can cut the sheet with accurate length and quantity.
The winding device uses big torque motor, can freely regulate the winding speed and tension.
The automatic meter countering device can pre-set the length of the product.
This production line can be used to produce the PVC foamed inside spiral silent pipe after changing the mould
Delivery time: About 45 working days.

If you want more details about this High Quality Multilayer PE Sheet Extrusion Line, please contact us.

TRADE TERMS
Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
Delivery Time: 40 days after receipt of prepayment.
Packing Method:  Packing film or wooden case
Guaranteed Time:  12 months
MACHINERUNNING TEST AND AFTER SERVICE
When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 




 

Cement Grinding Media

Grinding Balls For Mining,Steel Balls For Ball Mill,Grinding Steel Balls,Ball Mill Grinding Media

SHANDONG SHENGYE GRINDING BALL CO., LTD , https://www.sdgrindingball.com