- Model NO.: HY035
- Surface Finish Process: Sand Blasting
- Plastic Material: PP
- Runner: Hot Runner
- Installation: Fixed
- Standard: DME
- Trademark: Huayang
- Specification: LYM, HASCO, DME
- Shaping Mode: Injection Mould
- Mould Cavity: Single Cavity
- Application: Furniture
- Design Software: UG
- Certification: ISO
- Customized: Customized
- Transport Package: Wooden Case
- Origin: Chair
Material: PP HDPE
Surface Finish Process:Â Sand Blasting
Cavity: 1
Steel: P20H 718H, P20, NAK80, 2316, S136, DIN1.2738, DIN1.2344, AISI H13
Treatment: Nitriding
Gate type: Hot runner
Eject type: Auto fall
BASE:LKM , DME, HASCO, etc.
Structure:Double color injection mould, Solid Mould, Insert Mould, Mould with Slide,Â
Mould with Lifter
The product from cuntomer's web
As an experienced toolmaker specializing in plastic molds for more than 10 years, we can custom reliable quality mould at competitive cost with Short Lead Time for you. Warmly welcome to send sample or 2D or 3D drawings for estimated quotation. If convenient, you are warmly welcome to visit our factory.
The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.
For Kato Cylinder Seal Kit,For Kato Center Joint Seal Kit,Center Joint Seal Kit,Repair Kit For Kato Joystick
Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com