PTFE Lined Wafer Lug Butterfly Valve (Ltd71F)

PTFE Lined Wafer Lug Butterfly Valve (LTD671F)


PTFE Lined Wafer Lug Butterfly Valve (LTD671F) is a valve (valve plate) rotating around fixed axis perpendicular to the channel, the piston type double or single action (spring reset) pneumatic actuator and the butterfly valve, belonging to the rotating high performance control or cut off the valve, the valve is used with electric - gas valve positioner or the electromagnetic valve, air filter regulator, limit switch (valve position), which can realize the fluid process pipeline in the proportion regulation and two cut-off control, automation control so as to achieve the parameters on the fluid flow, pressure, temperature, liquid level etc.. Widely used in gas, liquid, thick slurry or powder, suspended particles such as medium
 
PTFE Lined Wafer Lug Butterfly Valve (LTD671F) Product features
1 pneumatic butterfly valve operating torque is small, the operation torque is one of the smallest of all valves, quick open and close, powered by compressed air, through the piston rack, mechanical drive rod gear, to a rotary output torque to rotate the valve plate 0~90 °, will be able to complete the opening and closing action quick, simple structure, volume small, light weight, small flow resistance, flow coefficient, good sealing performance. The scope of regulation. Is the execution unit automation control system of the instrument;
2 the electric - gas valve positioner, the electric signal and compressed air as a driving force, receive control input 0-10mA DC or 4-20mA DC current signal, the regulator will be compressed air, into the air pressure signal input and output, the rotation angle changes the valve plate (0-90 ° arbitrary angle), which regulates the flow rate better.
3 the electromagnetic reversing valve, valve position, with a AC220V or DC24V power supply voltage and the compressed air as the power, fast two bit on the fluid medium off control.
4 pneumatic actuator using the piston and crank conversion structure, large output torque, small volume, adopts fully sealed waterproof design high protection level. The cylinder body adopts the mirror cylinder, without oil lubrication, the friction coefficient is small, corrosion resistance, with superior durability and reliability. All transmission bearings with boundary self lubrication bearing lubrication without oil, ensure that the transmission shaft does not wear.

PTFE Lined Wafer Lug Butterfly Valve (LTD671F)
Wafer Lug FEP / PTFE/ PFA Lined Butterfly Valve   
Nominal Diameter: DN40 - DN400  11/2"---16"
Face-To-Face:EN 558-1 (DIN 3202)
                      ISO 5752
                      API 609
Flange Accommodation: DIN PN10 PN16
                                      ANSI 150
                                      JIS 5K JIS 10K
Top Flange: ISO 5211
Temperature Range: -40°C to +180°C (depending on operation pressure)
Operating Pressure: Max. 10 bar,(16 bar for special version)
Differential Pressure: Max. Δp 10 bar,(16 bar for special version)
Drive type: Hand lever
         Gear box
         Pneumatic actuator
Ordering instructions
Type and name 1 product 2 nominal diameter DN (3 4 mm nominal pressure flow characteristics of 5 body materials and trims 6 medium type and temperature range of 7 valve before and after the pressure (differential pressure) 8 seal form 9 accessories

Ms Cathy
Yongjia Goole Valve Co.,Ltd
Heyi Industrial Zone, Oubei, Wenzhou,325105, China
Tel: +86-577-57781015,   Fax: +86-577-67985602
Mob: +86 150 5759 6965,  
 
Web: www.chinavalve1.com

Stainless Steel Flux Cored Wire

Because toughness is better than 410, so often used to weld more demanding turbine rotor, and other wear-resistant & corrosion-resistant occasions. Because of the addition of Ni or Mo, the corrosion resistance is more stable, the hardness and high temperature wear resistance are improved, and the cold cracks are effectively prevented at the same time.The flux-cored wire has excellent welding performance, smooth wire feeding, stable arc, beautiful forming, very little spatter, stable mechanical properties of deposited metal, high qualified rate of X-Ray. FM410NiMoT1-1 is stainless steel Flux Cored Wire, suitable for full position welding.

Stainless Steel Flux Cored Wire,Stainless Steel Flux Core Wire,Stainless Flux Core Wire,Flux Cored Stainless Steel Welding Wire

Jiangyin Vankey Machinery Technology Co.,Ltd , https://www.jswkweldingwire.com