PVC ASA PMMA Composite Glazed Tile Extruder Line

Model NO.: ACE80/156-ACE92/188
Barrel & Screw: Bimetallic Barrel & Screw
Controller: Siemens PLC
Extrusion Mode: Co-Extrusion
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered
Specification: 880mm PVC ASA colonial tile extrusion line
Origin: China
HS Code: 8477800000
Model NO.: ACE80/156-ACE92/188
Barrel & Screw: Bimetallic Barrel & Screw
Controller: Siemens PLC
Extrusion Mode: Co-Extrusion
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered
Specification: 880mm PVC ASA colonial tile extrusion line
Origin: China
HS Code: 8477800000
PVC ASA PMMA composite glazed tile extruder line
For production of variety of classic shapes, such as colonial style in Brazil, bamboo style in China and European big wave
style which are consistent access to the customers; Bimetallic screw and barrel can meet 60-120phr high fill formula production
requirements.
PVC ASA PMMA Composite Glazed Tile Extruder Line

Advantages:
♦  Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can 
    guarantee perfect solution;
♦  Co-extruder equipped with dehumidifying and drying system can be applied to produce PMMA/ASA composite material, which
   ensuresthe good performance and high quality of final  product;
♦  T-die adopted hanger style can be applied to produce single PVC melt material or multi-layer compound material, and flow
    surface adopts polish and electroplated treatment;
♦  Calibrator usually adopts 18-22couples cast aluminum module and each one is composed of bush and mandrel, completely   
   occlusion, ensures the shape and size of the product, also cooling method adopts frozen cooling air which greatly improve   
   cooling effect;
♦  Guillotine cutter ensuing flat and chip free cutting, and tracking cutter especially for thick and high filler product.
♦  Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently;
PVC ASA PMMA Composite Glazed Tile Extruder Line
PVC ASA PMMA Composite Glazed Tile Extruder Line
PVC ASA PMMA Composite Glazed Tile Extruder Line
PVC ASA PMMA Composite Glazed Tile Extruder Line

Work flow and detailed information:
Feeder • To feed material into extruder;
Extruder • World famous brand electrical component such as Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Bimetallic screw and barrel;
• Intelligent PLC controlling system with human-friendly interface. 
Co-extruder • World famous brand electrical component such as Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Intelligent PLC controlling system with human-friendly interface. 
Flat die and feed block • Coat hanger type
• 5CrNiMo steel and P20 material
• Apply to single layer and muti layer with top layer adopts PMMA/ASA co-extrusion
• Support trolley is include
Embossing roller • Speed driving by frequency inverter
• Compacting control by pneumatic
• Offer the pattern on surface of product
Calibration table • Speed driving by frequency inverter
• Calibrator usually adopts 18-22couples cast aluminum module and  each one is composed of bush andmandrel, completely occlusion, ensures the shape and size of the product
• Cooling method adopts both air fan and frozen cooling air which greatly improve cooling effect
• Independent operation panel for convenient operation
Cutting system • Guillotine cutter ensuing flat and chip free cutting
• Tracking cutter especially for thick and high filler product.
• Intelligent PLC controlling system with human-friendly
interface make the operation easily and conveniently
Ridge tile calibrator • Hydraulic driving
• High quality cast aluminum material
• Double station heating oven is include
Stacker • Stainless steel304 as touching material

Main elements brand:
♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
PVC ASA PMMA Composite Glazed Tile Extruder Line

Technical Parameter:
Material Width Thickness Extruder Model Designed Output
ASA/PMMA+PVC 880/1040mm 1.8-3.0mm ASS50/30+ACE80/156 350-400kg/h
ASA/PMMA+PVC 880/1040mm 1.8-3.0mm ASS50/30+ACE92/188 500-550kg/h

Our service:
Ability to provide the customized plastic extrusion solutions;
Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
Complete sales system covering the pre-sales, sales and after service jobs;
Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
Commissioning & installation service in customer plant and free training to client labors.

In order to provide you the specific proposal, please advise:
Basic drawing of final product request to be provided;
Output capacity will be need;

Contact to ACEEXTECH: 
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107   
Mobile/hatsApp: +86 13962472339
Website:www.aceextech.com 
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
 
PVC ASA PMMA composite glazed tile extruder line
For production of variety of classic shapes, such as colonial style in Brazil, bamboo style in China and European big wave
style which are consistent access to the customers; Bimetallic screw and barrel can meet 60-120phr high fill formula production
requirements.
PVC ASA PMMA Composite Glazed Tile Extruder Line

Advantages:
♦  Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can 
    guarantee perfect solution;
♦  Co-extruder equipped with dehumidifying and drying system can be applied to produce PMMA/ASA composite material, which
   ensuresthe good performance and high quality of final  product;
♦  T-die adopted hanger style can be applied to produce single PVC melt material or multi-layer compound material, and flow
    surface adopts polish and electroplated treatment;
♦  Calibrator usually adopts 18-22couples cast aluminum module and each one is composed of bush and mandrel, completely   
   occlusion, ensures the shape and size of the product, also cooling method adopts frozen cooling air which greatly improve   
   cooling effect;
♦  Guillotine cutter ensuing flat and chip free cutting, and tracking cutter especially for thick and high filler product.
♦  Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently;
PVC ASA PMMA Composite Glazed Tile Extruder Line
PVC ASA PMMA Composite Glazed Tile Extruder Line
PVC ASA PMMA Composite Glazed Tile Extruder Line
PVC ASA PMMA Composite Glazed Tile Extruder Line

Work flow and detailed information:
Feeder • To feed material into extruder;
Extruder • World famous brand electrical component such as Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Bimetallic screw and barrel;
• Intelligent PLC controlling system with human-friendly interface. 
Co-extruder • World famous brand electrical component such as Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Intelligent PLC controlling system with human-friendly interface. 
Flat die and feed block • Coat hanger type
• 5CrNiMo steel and P20 material
• Apply to single layer and muti layer with top layer adopts PMMA/ASA co-extrusion
• Support trolley is include
Embossing roller • Speed driving by frequency inverter
• Compacting control by pneumatic
• Offer the pattern on surface of product
Calibration table • Speed driving by frequency inverter
• Calibrator usually adopts 18-22couples cast aluminum module and  each one is composed of bush andmandrel, completely occlusion, ensures the shape and size of the product
• Cooling method adopts both air fan and frozen cooling air which greatly improve cooling effect
• Independent operation panel for convenient operation
Cutting system • Guillotine cutter ensuing flat and chip free cutting
• Tracking cutter especially for thick and high filler product.
• Intelligent PLC controlling system with human-friendly
interface make the operation easily and conveniently
Ridge tile calibrator • Hydraulic driving
• High quality cast aluminum material
• Double station heating oven is include
Stacker • Stainless steel304 as touching material

Main elements brand:
♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
PVC ASA PMMA Composite Glazed Tile Extruder Line

Technical Parameter:
Material Width Thickness Extruder Model Designed Output
ASA/PMMA+PVC 880/1040mm 1.8-3.0mm ASS50/30+ACE80/156 350-400kg/h
ASA/PMMA+PVC 880/1040mm 1.8-3.0mm ASS50/30+ACE92/188 500-550kg/h

Our service:
Ability to provide the customized plastic extrusion solutions;
Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
Complete sales system covering the pre-sales, sales and after service jobs;
Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
Commissioning & installation service in customer plant and free training to client labors.

In order to provide you the specific proposal, please advise:
Basic drawing of final product request to be provided;
Output capacity will be need;

Contact to ACEEXTECH: 
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107   
Mobile/hatsApp: +86 13962472339
Website:www.aceextech.com 
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
 

Engraving materials commonly used in Advertising Cnc Router and their scope of application:

1. Commonly used engraving materials

Two-color board, organic board (acrylic), artificial stone, PVC board, wood, MDF, ABS.

2. Unused carving materials

Metal materials (steel, alloy, copper, aluminum, etc., mainly used in the mold manufacturing industry), rubber, cowhide, stone, fireproof board, cardboard, aluminum composite board, copper clad board, resin board and other composite materials, horns, bronze , steel stamp, rubber stamp, etc.

3. Applicable scope

Badge, modeling, steel mold, engraving, furniture engraving, gifts, souvenirs, crafts, signboards, sign making, hand boards, punching, printing factory die, advertising word cutting, engraving advertising light boxes, in the process of processing As the material and processing method change, the working parameters of the tool are not the same, and should be adjusted appropriately.

The Engraving Machine should process the material according to the design use of the machine, and processing the unsuitable material for a long time is likely to cause the accuracy of the machine to decrease.

Advertising CNC Router

Cnc Advertising,Cnc Router 3D,Industrial Cnc Router,Advertising Cnc Router

JINAN YIHAI CNC ROUTER MACHINERY CO.,LTD , https://www.yhcncrouter.com

This entry was posted in on