Refrigerated trucks should pay attention to the problem of refrigeration

Pre-cooling is a cooling method that is performed before long-distance transportation or refrigerating of food , and the requirement is to rapidly reduce the food to be stored to a prescribed temperature. It is an important measure to maintain the quality of the food being transported and to extend its shelf life. Pre-cooling is usually carried out between cold storage and pre-cooling. Common pre-cooling methods include natural air cooling, ventilation cooling, vacuum cooling, and cold water cooling. The pre-cooled food should be quickly stored in a low-temperature environment.

The temperature in the refrigerator may not be constant at a certain temperature value. Because the performance of the refrigerator, the size of the storage capacity, and the temperature difference between inside and outside, the temperature of the storage tank may fluctuate within a certain range. In general, foods are stored at a lower temperature, and the smaller the variation, the better. This is conducive to food preservation, prevent loss and low temperature physiological diseases.

Different foods have different optimum refrigeration temperatures. The cold storage temperature and the temperature of the food after storage are affected by various factors, such as the difference between the temperature of the food and the storage temperature at the time of storage, the efficiency and capacity of the refrigerator , the air circulation inside the warehouse, the stacking method, the food variety and maturity. Degree and so on. When storage, stacking should be reasonable, and the storage temperature should be adjusted according to the actual situation. Before the storage, a gradual temperature increase method should be adopted to avoid condensation on the food surface due to large temperature difference between inside and outside.

Cold storage is often caused by the large amount of heat absorbed by the evaporator, and frost is continuously attached to it, and the ice is continuously melted away. As a result, the humidity in the storage tank is often lower than the humidity required for food storage. The humidity in the cold room can be adjusted by increasing the evaporator area, reducing frost formation, installing a spray device or an automatic humidifier. In addition, when the relative humidity of the warehouse is increased due to the frequent in and out of the goods, the moisture absorption device can be installed to absorb moisture, and the cold storage management can be strengthened , and the frequent entry and exit of goods and personnel can be strictly controlled.

Hubei Chengli Special Purpose Vehicle Co., Ltd.   Address: Chengli Automobile Industrial Park, South Suburb of Suizhou City, Hubei Province  

Sales Manager : Manager Zhang    Mobile Phone: 18727982266   0722-3325000     Fax: 0722-3324444

CNC Machining Parts

I am looking forward to hearing from you.

Wholesale different car accessories,such as sensor spacer parts,car automotive oil filter and AN NPT treaded adapter,auto parts,Oxygen Sensor Spacer, o2 sensor tool,Car Antenna,Valve Caps,jdm car accessories ,we also oem odm different hardware and plastic parts with your drawing or samples.

Our company provides:OEM/ODM CNC machining turning milling service according to your drawing or samples.

Here have 210 workers,5000m2 non-dust workshop.10 years experience,5 years' vendor of Medical

Company .ISO CE&FDA certificated.one hour reach shehzhen port.this is how we keep superior quality and competitive offer for global valued customers.

Cnc Machining Parts,Cnc Machined Auto Parts ,Oxygen Sensor Spacer Auto Parts ,Cnc Machining Steel Oxygen Sensor

Dongguan Jiaxing Precision Machinery Co., Ltd. , https://www.jiaxautoparts.com