As the saying goes, life is like an airplane. It doesn't fly much. The key is landing smoothly. In fact, life is like a car, not how fast you can drive, the key is to stop it.
In our lives, there are always some owners who can't hold the car. The result is often a tragedy.
For the safety of you and your family, you must not take the five minutes before you travel and be a small self-checking brake. After all, safety is the most important.
1. Look at the appearance method: Observe the appearance of the brake disc to see if there are more dirt and dust. If your car has a lot of dust, wash it quickly.
Note: Do not flush the brake pads when the brake disc is hot. This may cause the brake discs to deform.
2, touch sense method: Observe the brake pads, and touch the scratches on the brake disc by hand, if there are more deep scratches, we must pay attention to, the grinding or the replacement should go to the repair shop to find a dedicated maintenance technician to deal with.
Note: Be sure to pay attention to the temperature when touching the brake pads. A few heavy brakes may make the pads hot.
3, pinch thickness method: Check the car brake pad wear, brake disc wear and tear to be within the manufacturer's specified range, probably compared by hand, if the amount of wear is greater, you should consider looking for a professional service technician to see if you need replace. Compare whether the four wheel brake discs wear evenly.
Note: Be careful of the temperature of the brake disc. Don't be hot.
4. Check the fluid level to check the brake fluid level. The brake fluid pot is here.
Method: Check the height of the brake fluid, and unscrew the brake fluid pot. The fluid level should be between two scales. Too much or too little will affect the braking force.
Check brake fluid color?
Note: Prevent water, gasoline, and some solid debris from falling into the brake fluid. These things may cause loss of braking force.
5, to see the instrument panel brake system alarm light means when the brake system is out of trouble, then you need to do a system check 1, see the handbrake put away, (put the handbrake standard)
2, see if the brake fluid is enough, there are already 3, look at the brake pads is not too thin,
4. Unplug the battery for a few seconds and plug it in again to see if it can eliminate the sensor failure.
Note: If you can't solve the situation yourself, please contact the maintenance master.
Hydraulic Pipe Bending Machine
CTK-NC series single-head high-speed hydraulic Pipe Bending Machine is a product developed by our factory on the basis of absorbing advanced technology at home and abroad. The product is hydraulic transmission, PLC control, and man-machine dialogue operation using touch screen. The whole machine has the advantages of convenient operation, stable performance and high production efficiency. It is an ideal equipment for the pipe fittings processing industry, especially the stainless steel pipe fittings processing industry.
Hydraulic Pipe Bending Machine,Hydraulic Pipe Bender,Hydraulic Tubing Bender,Air Hydraulic Pipe Bender
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com