scooptram 0.6 Cubic electric  mine machine

Characteristics

1. Structural Design

A1. The front and rear frames are articulated by slew hinge with good performance and easy operation.
A2. Ergonomics Canopy with comfortable operation.
A3. The bucket is designed to be V shape to reduce working resistance.

1. Operation Safety

B1. 4 wheels driving and braking.
B2. The combination design of parking brake, working brake and emergency brake has good braking performance. Braking is spring applied, hydraulic release.
B3. Axles are equipped differentials.
B4. Full hydraulic steering system, easy and flexible operation. Hydraulic pilot control to reduce the labor intensity of the driver.
B5. The cable reel is full hydraulic controlled, cable spreading and retracting are consistent with the equipment running speed, reducing the cable tension and prolonging the cable life effectively.

1. Early warning and maintenance

C1. Automatic alarm system for oil temperature, oil pressure and electrical system.

1. Enegy-saving and Enviroment friendly

D1. Electric motor driven, no air pollution, small noise.
D2. Hydrostatic loop stepless speed change device adopts imported Slovakia variable pump and motor, high efficiency and low energy consumption.
D3. The independent power cooling system is adopted for the hydraulic oil cooling, and the cooling efficiency is high.
Optional
1Remote control system

Main technical parameters
Dimension(tramming)    5050*1150*1900
Min ground clearance    200mm
Departure angle            15°
Max lift height                2600mm
Max unloading height    900mm
Axle oscillation angle    ±8°
Climing ability(loaded)    20°
Bucket Volume              0.6m3
Payload                         1200KG
Max breakout force        35KN
Max traction                   40KN
Speed                            0-8km/h
Bucket roll back time      ≤1.0s
Bucket lift time                ≤2.5s
Bucket tilt time                ≤1.6s














  scooptram 0.6 Cubic electric  mine machine

Characteristics

1. Structural Design

A1. The front and rear frames are articulated by slew hinge with good performance and easy operation.
A2. Ergonomics Canopy with comfortable operation.
A3. The bucket is designed to be V shape to reduce working resistance.

1. Operation Safety

B1. 4 wheels driving and braking.
B2. The combination design of parking brake, working brake and emergency brake has good braking performance. Braking is spring applied, hydraulic release.
B3. Axles are equipped differentials.
B4. Full hydraulic steering system, easy and flexible operation. Hydraulic pilot control to reduce the labor intensity of the driver.
B5. The cable reel is full hydraulic controlled, cable spreading and retracting are consistent with the equipment running speed, reducing the cable tension and prolonging the cable life effectively.

1. Early warning and maintenance

C1. Automatic alarm system for oil temperature, oil pressure and electrical system.

1. Enegy-saving and Enviroment friendly

D1. Electric motor driven, no air pollution, small noise.
D2. Hydrostatic loop stepless speed change device adopts imported Slovakia variable pump and motor, high efficiency and low energy consumption.
D3. The independent power cooling system is adopted for the hydraulic oil cooling, and the cooling efficiency is high.
Optional
1Remote control system

Main technical parameters
Dimension(tramming)    5050*1150*1900
Min ground clearance    200mm
Departure angle            15°
Max lift height                2600mm
Max unloading height    900mm
Axle oscillation angle    ±8°
Climing ability(loaded)    20°
Bucket Volume              0.6m3
Payload                         1200KG
Max breakout force        35KN
Max traction                   40KN
Speed                            0-8km/h
Bucket roll back time      ≤1.0s
Bucket lift time                ≤2.5s
Bucket tilt time                ≤1.6s














 

Two machines in one

A single laser and cutting head for two complementary processes, tube and sheet metal, with performance equal to that of a dedicated system.

It is the answer when a small footprint is required or if the production load does not justify the use of two separate systems.

Immediate change-over from tube to sheet metal
Change instantly from sheet to pipe without the need for additional set up or tooling. Use your time making production not making changeovers.
It`s the ideal way to maximize your return on investment.

LEARN MORE ABOUT OUR  TUBE&Plate Laser Cutting Machine,

Trying to figure out which model right for you? Contact our team to learn more about how our machines to 

make your  design in mind .

Tube&plate Laser Cutting Machine

Fiber Laser Metal Cutting Machine,Plate Laser Cutting Machine,Tube Laser Cutting Machine,Steel Laser Cutting Machine

Jinan Vmade CNC Machine Co.,Ltd , https://www.vmadecnc.com