(1) The gap between the impeller and the cover. The size of this gap directly affects the amount of inflation. If the clearance is too large, the slurry will turn from the front side of the blade to the back side of the blade, reducing the vacuum behind the blade and reducing the amount of inflation. If the clearance is too small, the impeller and the cover are prone to impact. And friction, and reduce the amount of inflation. Tests have shown that a suitable gap is 6 to 8 mm.
(2) The speed of the impeller. The larger the rotational speed of the impeller in a certain range, the larger the amount of inflation. However, if the rotational speed is too large, the impeller cover wears quickly, the power consumption increases, and the slurry surface is unstable.
(3) The pulp mass fraction also has a great influence on the amount of aeration and the degree of dispersion. In a catastrophic condition, as the mass fraction of the pulp increases within a certain limit, the amount of aeration and the degree of dispersion also increase. However, the mass score should not be too large. If it is too large, the amount of inflation will deteriorate.
(4) The amount of slurry. When the amount of slurry entering the center of the impeller is most appropriate, the amount of aeration is the largest. Because the amount of slurry is large within a certain range, the centrifugal force generated when the slurry is scooped out is also large, and the vacuum in the negative pressure zone formed is high, so that the amount of inflation is increased. However, if the amount of slurry is too large, the slurry will block the air cylinder above the impeller, causing difficulty in inhaling, and the amount of inflation will be reduced.
Note: Due to the self-priming flotation machine, the motor power is simultaneously distributed to the three parts of suction, mixing and aeration. Therefore, any change in the aspect will change the effect of other parts. This energy conservation is determined! Therefore, many of them are currently added. Fans to distribute the air to solve this Mao Dun!
Automobile Tire Polish is the cleaning agent in the Car Care Spray.
Tire Polish Polish is suitable for automobile tires, motorcycle tires, bicycle tires, engineering tires, aviation tires, bias tires, radial tires and other kinds of tires of brightness, polishing, blackening treatment.
GL Tyre Shine Spray adopts high-tech water-based formula, does not hurt the tire, wheel hub, natural drying, easy to use, fast cleaning tire dirt, forming a protective layer, effective resistance to UV.The tire Shine also has excellent antistatic function, is not easy to absorb dust, and has a long-lasting bright appearance;
Method of Use:
1. For the best results, clean each tire thoroughly with high-pressure water first
2. Gently shake the tire brightener.
3. Evenly wipe the tire shine spray on the clean and dry side wall of the tire.
4, The use of tire wipe tire brightener.
5, Natural air dry.
Note: Wipe the moisture off the tire for better results
Points to note:
1. Stay away from flames
2, this product is not edible, such as accidentally into the eyes, immediately rinse with water;
3. Keep away from children;
Tyre Shine Polish,Tyre Shine,Tire Shine Spray,Tyre Shine Spray,Car Tire Polish
Guangzhou Lidi Automobile Supplies Co., Ltd. , https://www.lambosscn.com