Throttling device pressure method Throttling device pressure method, there are five kinds of orifice plate in terms of: angular contact pressure, flange pressure, span pressure, theoretical pressure and tube access pressure. As far as nozzles are concerned, only angled pressure and span pressure are used.
(l) The angle between the upper and lower pressure-retrieving holes and the front and rear end faces of the orifice plate (nozzle) are equal to half the diameter of the pressure-receiving hole, or equal to half the width of the pressure-gap annular gap. The penetrating point is exactly flush with the end face of the orifice plate, and the angled access pressure includes the ring chamber pressure and the separate drilling pressure.
(2) The distance between the center of the pressure on the upper and lower sides of the flange and the front and rear faces of the orifice plate is (25.4±0.8)mm.
(3) The distance between the center of the pressure taking hole on the upstream side and the front end face of the orifice (nozzle) is 1D, and the distance between the center of the pressure taking hole on the downstream side and the rear end face of the orifice (nozzle) is 1/2D.
(4) The distance between the center of the pressure taking hole on the upstream side of the theoretical pressure taking method and the front end face of the orifice plate is 1D ± 0.1D, and the spacing between the center line of the pressure taking hole on the downstream side and the rear end face of the orifice plate is β=d/D. Different sizes.
(5) Pipe connection pressure The center line of the pressure inlet hole on the upstream side is 2.5D from the front end face of the orifice plate, and the center line on the downstream side of the pressure extraction hole is 8D from the rear end face of the orifice plate.
Among the above five pressure-recovery methods, the most commonly used angle pressure method is flange pressure, followed by the flange pressure method. The main medium is the pressure difference between the gas liquid and the steam. For details, please refer to the throttle device design manual, or consult the relevant technical personnel of the company.
Aerosol Cone and Dome Production
Aerosol Cone And Dome Production,Aerosol Cone Production Line,Dome Production Line,Aerosol Cone And Dome Production Line
Zhejiang Golden Eagle Food Machinery Co., Ltd , https://www.tongyi-machinery.com