Solar activity is not the primary factor in climate change

A new scientific study found that the change in the solar heat and the impact on the earth's climate change are not so significant.
This finding overturned a widely held scientific view that the long-term changes in the earth's cold and warm climate were caused by cyclical fluctuations in solar activity.
The study of climate change in the Northern Hemisphere over the past 1000 years shows that until 1800, the main driver of the climate cycle change was the volcanic eruption. The discovery seems to have overturned the claim that sunlight reached the earth, causing a cool, dry weather. Since 1900, greenhouse gases have become the leading cause of climate change.
The results of the survey indicate that the low solar activity period does not have a significant impact on the temperature on the earth and is expected to improve scientists' understanding and climate prediction.
Scientists at the University of Edinburgh conducted a study using data from tree rings and other historical sources to construct past temperature records. They compared these data records with a computer-based model of past climate and found only subtle changes in the sun.
They found that models that produce small changes in sunlight give the best correlation with temperature records, suggesting that solar activity has had minimal impact on the squadron temperatures over the past thousand years.
This study was published in the Natural Earth Science and is supported by the Natural Environment Research Council.
Dr. Andrew of the University of Geosciences at Edinburgh College said: "Until now, we know little about the impact of solar activity on past climate. We hope that our new discoveries will help increase our understanding of how climate has changed over the past few centuries. And to improve the ability to predict how they will develop in the future. The link between the sun and the unusually cold winter in the UK is still being explored."

Electronics Production Machinery

SF-580is a Automatic Lead Cutting And Bending Triode Forming Machine.Size:1500x1000x1500

1.Apply to LED/light emitting diode,Triode Forming Cutting Machine,aluminum electrolytic capacitor,metallic film capacitor,safety capacitor,quartz crystal and other upright type elements.

2. Import CAM mechanical transmission,precise stable,durable and low noise. Each part has the special hard coating with long service life.

3. The led Lead Forming Machine whole set of system is used PLC control with ultra strong stability.The operator interface is touch screen convenient and easy to lean and the data alignment is more convenient.

4. Speed control of the non-phase fine adjustment of transducer.

5. Upper clipand open clip system are rack and pinion type.The change of fixture centerline is invariant,no harm by clipping and more convenient to change the specification.(D4--(D6are shared the same fixture and(D8-(D10are shared the same fixture.

6. Molding pitch:2.0mm,2.5mm,5mm,7.50mm,10mm,15mm,20mm,25mm

7. Molding/feet cut method:odd leg,90℃bending,incurvature, excurvation and vertical angle,etc.

8. Length of feet cut:2.5mm-28mm.

9. Working pressure:4kg/Cm2

10.The special molding pattern can be customized according to the clients different requirements.

11. The equipment is anti-static.

The Bulk Resistor Radial Cutting Machine is suitable for shaping and cutting feet of various electronic components.Any details you want to know about Automatic Lead Forming Machine please contact us for further more.

Electronics Production Machinery

SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com

This entry was posted in on