1, the accuracy of the instrument China's electrical instrument is divided into 0.1,0.2,0.5,1.0,1.5,2.5,5.0 seven levels, the meaning of this level refers to the instrument full scale error percentage. For example, the rating is 0.5, and the input current is 5A. The meaning of 0.5 is that when the current meter enters 5A, its maximum error will not exceed 0.5%.
There is another way to describe the error, which is called uncertainty, which has not been fully adopted in the instrument industry in China. Therefore, it will not be described.
2. Advantages of Digital and Analogue Meters: Accurate Readings and Accuracy The strengths of the analog meter: You can see the change trend and range of the pointer according to the swing of the pointer, so there are also digital display instruments with light columns. To achieve this function of the analog meter, it is generally used to measure and display the liquid level, which looks more intuitive.
3, the instrument's power supply is generally divided into transformer power supply, switching power supply, battery-powered three.
Switching power supply: Advantage is the wide input voltage range of 70-250V, the disadvantage is poor anti-interference ability, especially in places with large harmonics, such as steel mills, instrument power supply parts are easily damaged.
Transformer Advantages: Anti-harmonic anti-jamming, Disadvantages: Single input voltage level, when ordering need to explain the voltage level, DC power supply is not available.
4, the input measurement signal input measurement signal is divided into half, AC signal and DC signal, DC signal accuracy is generally much higher than the AC signal.
5. The true rms and average multimeter display averages.
The value displayed by the installed meter is generally a true rms value, with strong anti-interference ability, anti-harmonic and frequency change characteristics.
6, the size of the general appearance of 1209680 square 7, additional function meter in addition to the usual measurement functions, there are additional modules.
1. The communication module supports RS-485modubusRTU protocol 2. Transmitter module 4-20mA transmission measurement signal 3. The control module outputs through the relay to achieve over-range alarm for the set voltage and current values.
8. Set the current full-scale ratio, according to the actual installation of the transformer ratio can be set by the user from 5A-8000A in accordance with the national standard series value.
9, the speed of response Ordinary digital displays generally use a dedicated chip, dedicated chip because of a lot of functions, so the response time is relatively slow, generally only 3-5 valid values ​​for one second.
In some special occasions, customers request fast response, it will involve this parameter response speed 10, above, so many are for the industrial frequency 50Hz meter market there are some special instruments, such as the 400Hz frequency table, mainly Aviation; also has a high frequency meter, such as 20kHz, mainly used in some high-frequency equipment, such as super audio power supply, inverter output current.
11, data acquisition software on the 485 interface with the instrument, usually many users need to write their own collection software in the instrument electronics professional production of digital display controller, so that the customer's production efficiency has been the greatest improvement, as much as possible for customer service.
The face of the market with a large number of digital electrical instrument, the model is complex, when the order is not the mistake, is to get the hand is not what you want.
There is another way to describe the error, which is called uncertainty, which has not been fully adopted in the instrument industry in China. Therefore, it will not be described.
2. Advantages of Digital and Analogue Meters: Accurate Readings and Accuracy The strengths of the analog meter: You can see the change trend and range of the pointer according to the swing of the pointer, so there are also digital display instruments with light columns. To achieve this function of the analog meter, it is generally used to measure and display the liquid level, which looks more intuitive.
3, the instrument's power supply is generally divided into transformer power supply, switching power supply, battery-powered three.
Switching power supply: Advantage is the wide input voltage range of 70-250V, the disadvantage is poor anti-interference ability, especially in places with large harmonics, such as steel mills, instrument power supply parts are easily damaged.
Transformer Advantages: Anti-harmonic anti-jamming, Disadvantages: Single input voltage level, when ordering need to explain the voltage level, DC power supply is not available.
4, the input measurement signal input measurement signal is divided into half, AC signal and DC signal, DC signal accuracy is generally much higher than the AC signal.
5. The true rms and average multimeter display averages.
The value displayed by the installed meter is generally a true rms value, with strong anti-interference ability, anti-harmonic and frequency change characteristics.
6, the size of the general appearance of 1209680 square 7, additional function meter in addition to the usual measurement functions, there are additional modules.
1. The communication module supports RS-485modubusRTU protocol 2. Transmitter module 4-20mA transmission measurement signal 3. The control module outputs through the relay to achieve over-range alarm for the set voltage and current values.
8. Set the current full-scale ratio, according to the actual installation of the transformer ratio can be set by the user from 5A-8000A in accordance with the national standard series value.
9, the speed of response Ordinary digital displays generally use a dedicated chip, dedicated chip because of a lot of functions, so the response time is relatively slow, generally only 3-5 valid values ​​for one second.
In some special occasions, customers request fast response, it will involve this parameter response speed 10, above, so many are for the industrial frequency 50Hz meter market there are some special instruments, such as the 400Hz frequency table, mainly Aviation; also has a high frequency meter, such as 20kHz, mainly used in some high-frequency equipment, such as super audio power supply, inverter output current.
11, data acquisition software on the 485 interface with the instrument, usually many users need to write their own collection software in the instrument electronics professional production of digital display controller, so that the customer's production efficiency has been the greatest improvement, as much as possible for customer service.
The face of the market with a large number of digital electrical instrument, the model is complex, when the order is not the mistake, is to get the hand is not what you want.
High efficiency film coating machine is mainly used in pharmaceutical and food industry. It is an electromechanical coating equipment with high efficiency, energy saving, safety, cleanliness and meeting the requirements of GMP. It is used for organic film coating, water-soluble film coating, slow and controlled release coating, dropping pill coating, sugar coating, chocolate coating and candy coating of tablets, pills and candy.
Film Coating Machine,Tablet Coating Machine,Candy Coating Machine,Chocolate Coating Machine
Changzhou Lead Machinery Technology Co.,Ltd , https://www.leaddryer.com