The five artistic conception of LED lighting design

The first thing to say is that although LEDs have a large-scale application in the field of lighting, they are also an important direction in the future, but this does not mean that LEDs can be used in the world. Many newcomers who are determined to do lighting design are misled, thinking that LED is the only light source available, and it is all lighting. This is very bad for their growth. Because only in-depth research on the distribution of light with lamps such as fluorescent lamps and gas discharge lamps can provide a deep understanding of the nature of illumination. LEDs can't replace traditional light sources in many situations. The threshold for lighting design is low, so many people with relevant majors or completely unrelated majors join in. Without professional training, coupled with the misguided master's wrong guidance, you will go astray without knowing it. We believe that lighting design has a five-fold conception. The worst, garbage-like design is to close the eyes and illuminate the lights, regardless of the final effect, investment, power consumption, etc. Their method is to put the lights on the place where the lights can be placed, and to illuminate the places that can be illuminated. The project site is like a lighting expo. Although this design is rare now, it has not been completely eliminated. The interior of the home store is more mediocre than the design of the garbage. It is like a burger and fries in a fast food restaurant. This design simply illuminates the building, the same taste, or even no taste at all, as long as one glance is enough, there is no desire to look at the second eye. This design is neither artistic nor wasted energy. The passing line of McDonald's interior design should at least be a surprising design, with innovations that combine the function, shape and character of the building. The integration with the surrounding environment allows the viewer to experience the architectural design concept and the beauty that is completely different from the daytime. Funf Hofe, Munich Germany, Hanging Plants by HERZOG DE MEURON.

ANSI Threaded Flange

ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings. Included are:
(1) flanges with rating class designations 150, 300, 400, 600, 900, and 1500 in sizes NPS 1/2 through NPS 24 and flanges with rating class designation 2500 in sizes NPS 1/2 through NPS 12, with requirements given in both metric and U.S. Customary units with diameter of bolts and flange bolt holes expressed in inch units;
(2) flanged fittings with rating class designation 150 and 300 in sizes NPS 1/2 through NPS 24, with requirements given in both metric and U.S. Customary units with diameter of bolts and flange bolt holes expressed in inch units;
(3) flanged fittings with rating class designation 400, 600, 900, and 1500 in sizes NPS 1/2 through NPS 24 and flanged fittings with rating class designation 2500 in sizes NPS 1/2 through NPS 12 that are acknowledged in Non-Mandatory Appendix E in which only U.S. Customary units are provided.

B16.5 is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.
This Standard is to be used in conjunction with equipment described in other volumes of the ASME B16 Series of Standards as well as with other ASME standards, such as the Boiler and Pressure Vessel Code and the B31 Piping Codes.

Careful application of these B16 Standards will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.

Intended for manufacturers, owners, employers, users and others concerned with the specification, buying, maintenance, training and safe use of valves with pressure equipment, plus all potential governing entities.

ANSI Thr Flange,ANSI Threaded Flange,600Lbs Thr Flanges,150Lbs Threaded Flange

Hebei Welkin Pipe Fitting Manufacturing Co., Ltd , https://www.welkinpipeline.com