How expensive is the most expensive highway in the country? Guan Weijun organized the "most expensive highway" reported by the media and gave his friends a wake-up call!
Fuzhou 9.9 kilometers charge 23 yuan
From Fuzhou District to Changle, from Fuzhou East (Jian'an) to the front of the camp, about 10 minutes drive from the car dealership, after passing the Qingzhou Bridge, the estimated distance is only a few kilometers, charges 23 yuan! Is it three or four yuan per kilometer? Some people on-site driving tests found that the 9.9 km journey costs 23 yuan, and one class of car charges 2.32 yuan per kilometer.
Guangzhou Zhongshan to Huangpu 900 meters charge 3 yuan
The first phase of Guangzhou South China Expressway is 15.6 kilometers long. There are six toll stations including Guangyuan, Zhongshan and Huangpu. From Zhongshan to the Huangpu section, the odometer shows that even if it counts the road, the distance between the two toll stations is only 900 meters. The charge is actually 3 yuan.
Shanghai's most expensive highway 1 km to close 10 yuan
From Humin Road to Songjiang New Bridge, there is only one kilometer of expressway, G15 Shanghai-Zhejiang Toll Station to S19 Jinshanwei Toll Station is only 2 kilometers of expressway, but they must all collect a toll of 10 yuan. Some netizens joked that this is "the most expensive highway in Shanghai". Enthusiastically, netizens drove to the expressway segment, and after field visits, they confirmed that these conditions did exist. The management department explained that it is not uncommon for Shanghai’s expressway to implement a “starting price†of 10 yuan, and a ten-odd-kilometer charge of 10 yuan.
It is not easy for card friends to make money. FAW’s liberation reminds you to plan your driving route and try to avoid such expensive highways. You can save costs and save the province!
The powdery material is put into the closed container of the hopper. Due to the hot air flow, the powder is suspended in a fluidized circulation to achieve uniform mixing. At the same time, the atomized binder is sprayed into the container to wet the powder in the container, so that the powder is condensed into a loose shape. Small particles are granulated. At the same time, the hot air will dry them efficiently, the water will evaporate and the powder will solidify. The process is repeated to form ideal and uniform microporous spherical particles, which are mixed in the container at one time. There are three processes of granulation and drying.
Dry Granulator,Granulator Machine,Fluid bed Granulator,Wet Granulator
Griffin Technology Manufacturing Co., Ltd. , https://www.griffindryingeqpt.com