Function
1.Front sensor system
2.Rear sensor system
3.Speed mode and brake mode front activation
4.Side sensor limitation to 80cm
5.25cm offset for towbar and spare tire
Features:
Model number | CD01-4T0. |
Sensor diameter | 18.5mm |
Sensor cable | 2.5m with IP67 waterproof connector. |
Sensor detection | 0-2.5m. |
Display range | 0-2.5m for reverse sensor and 0-1.2m for front sensor. |
Built-in buzzer range | 30cm-1.5m for reverse sensor and 30cm-80cm for front sensor. |
Distance readout | Meter and Feet free change |
Warranty | 1 year |
Function details
1. Front system and rear system available for choice at end users. Dip switch 1 at back of
main box is workable for the function chosen.
2. Front activation choose by dip switch 2. UP for Speed activation, Down for Brake activation.
3. Side sensors detection limitation to avoid strong side sensor false alarm are designed. UP for
without limitation. Down for limitation to 80cm.Â
4. 25cm offset for spare tire and towbar design by dip switch 4. UP for 25cm offset.Â
5. IP67 Waterproof connector for each sensor cable. Easy for sensor replacement.Â
6. Control box with thick pin socket for sensor and power. Plull force is up to 15KG. System will not pull off easily. Free software update at customers side. Sensitivity can be adjusted freely.Â
7. Install the sensors not less than 45cm to avoid detecting ground. And turn a certain angle for side sensors.
8. DSP01 LED display can be installed upside down on the windshied or at the back of the car, or on dashboard. It can read the distance from Meter to Feet free by yourself. Built-in buzzer can beÂ
turned off.Â
Package
Neutral Package: White box
QTY: 12.0 SETS .
N.W.:7.5 KGS .
G.W.: 8.5Â KGS .
Volume:0.036m³
Shipping:DHL, UPS, FedEx, EMS Express available; Air and Sea shipment available. Best Fit Car Front Rear Reverse Parking Sensors Installing
Function
1.Front sensor system
2.Rear sensor system
3.Speed mode and brake mode front activation
4.Side sensor limitation to 80cm
5.25cm offset for towbar and spare tire
Features:
Model number | CD01-4T0. |
Sensor diameter | 18.5mm |
Sensor cable | 2.5m with IP67 waterproof connector. |
Sensor detection | 0-2.5m. |
Display range | 0-2.5m for reverse sensor and 0-1.2m for front sensor. |
Built-in buzzer range | 30cm-1.5m for reverse sensor and 30cm-80cm for front sensor. |
Distance readout | Meter and Feet free change |
Warranty | 1 year |
Function details
1. Front system and rear system available for choice at end users. Dip switch 1 at back of
main box is workable for the function chosen.
2. Front activation choose by dip switch 2. UP for Speed activation, Down for Brake activation.
3. Side sensors detection limitation to avoid strong side sensor false alarm are designed. UP for
without limitation. Down for limitation to 80cm.Â
4. 25cm offset for spare tire and towbar design by dip switch 4. UP for 25cm offset.Â
5. IP67 Waterproof connector for each sensor cable. Easy for sensor replacement.Â
6. Control box with thick pin socket for sensor and power. Plull force is up to 15KG. System will not pull off easily. Free software update at customers side. Sensitivity can be adjusted freely.Â
7. Install the sensors not less than 45cm to avoid detecting ground. And turn a certain angle for side sensors.
8. DSP01 LED display can be installed upside down on the windshied or at the back of the car, or on dashboard. It can read the distance from Meter to Feet free by yourself. Built-in buzzer can beÂ
turned off.Â
Package
Neutral Package: White box
QTY: 12.0 SETS .
N.W.:7.5 KGS .
G.W.: 8.5Â KGS .
Volume:0.036m³
Shipping:DHL, UPS, FedEx, EMS Express available; Air and Sea shipment available.
Air Preheaters (APH)
An air preheater (APH) is a device used to heat air, commonly used in industrial boilers, thermal power plants, and other thermal energy facilities. APH improves the thermal efficiency of the boiler by transferring heat from the flue gas to the air entering the boiler through heat exchange with it.
APH usually consists of a Heat Exchanger with a number of parallel pipes inside the exchanger through which smoke and air flow to allow heat exchange. In APH, the smoke flows on the outside of the heat exchanger and the air flows on the inside so that the heat between the smoke and the air can be transferred through the pipe walls.
The main business scope is various heaters, waste heat boilers, pressure vessels, supportingair preheaters, air coolers, furnace accessories and accessories, and provide equipment installation, with EPC ability of projects. At present, our customers have covered all large and medium-sized petrochemical enterprises in China and established long-term strategic cooperative partnership with them. Products are exported to Southeast Asia, Middle East, and other regions.
Air Preheaters,Enameled Air Preheater,Air Preheater Supply,Boiler Air Preheater
Jiangsu Gelan Environmental Technology Co., LTD , https://www.glkj2010.com