What are the maintenance methods for forest fire protection clothing?

When wearing the clothes as a forest fire in forest fires or forest property encountered a big fire, put out the fire and rescue protective clothing, you can also configure the required flame rods, pneumatic fire extinguisher and other equipment, put out the fire and rescue.

Maintenance

1. After taking off each time, check the condition of the fireproof clothing, focusing on whether there is wear.

2. If you want to remove the dirt remaining on the fireproof clothing, use tap water and neutral soap, and detergent if necessary. The detergent is only used on the contaminated parts. Be careful because the detergent may damage the surface.

3. If the fireproof clothing has been in contact with chemicals or bubbles are found, the entire aluminized surface should be cleaned. If there are residues of oil or grease left on the fireproof clothing, they should be washed with neutral soap.

4. The fireproof clothing must be thoroughly dried before re-storing.

5. If the surface of the fireproof clothing has a small area of ​​not very serious burning marks or wear, it can be repaired with an aluminum spray gun. If the exterior of the fireproof clothing is damaged, replace the fireproof clothing.