1. We must first determine how much current this product can withstand, but also to determine the size of its own current, Xiaobian in this proposal if the current is too large, then we can recommend the use of unipolar.
2. The arc length should be as long as possible, and the radius should not be too short. If it is too short, it will easily lead to the normal operation of the current, which will result in the phenomenon of power failure. Not working properly.
3. We must choose to install the rail on the outside or inside before selecting this product. Different locations will have different product radius requirements.
Shell and Plate Heat Exchanger
A shell and Plate Heat Exchanger is typical heat exchanger consists of a series of stacked plates and enclosed in a container shell. The plates are arranged in a chevron pattern, with each plate having its own inlet and outlet ports. Heat is transferred between the two fluids as they flow through the plates and shell respectively.
Shell and plate heat exchangers are used in particularly industrial plant. They are those require larger surface area and higher heat transfer coefficient, while at the same time, of high temperature and pressure.
In addition to their efficiency and compact size, shell and plate heat exchangers are also flexible in terms of material selection. Constructing material could be carbon steel, AISI 304, AISI 316L, AISI 904L, 254 SMO, Ti, Hastelloy, and more based on various operations.
Features of shell and plate heat exchanger are:
Gasket free
Stable and safe structure
Special seal structure for preventing media by-pass
High heat transfer efficiency
Shell And Plate Heat Exchanger,Plate Shell Heat Exchanger,Shell Plate Type Heat Exchanger,Welded Plate Shell Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com