Â
| Dimensions | Length | Width (mm) | Height (mm) |
| Booth Outside | 7000mm/277.6" | 5200mm/206.6" | 3500mm/141.7" |
| Booth Inside | 6900mm/271.6" | 3900mm/153.5" | 2750mm/108.3" |
| Entrance Door | Equipped with Handle &Â Lock, with tempered glass window | 3000mm/118.1" | 2700mm/106.3" |
| Personnel Door | Equipped with Handle &Â Anti-Explosion Lock,with tempered glass window | 800mm/31.5" | 2000mm/78.7" |
| Item | Total Power 16 KW; 380v/3phase/50hz | Noise <Â 80 db | |
| 1.Walls&Ceiling | EPS colorful steel skin board, Wall Panels: 50 mm thick, steel sheet thickness:0.476mm, galvanized steel roof panel. | ||
| 2.Basement System | Metal Pedestal (Galvanized), with Filter tray* 2rows & a pair of car ramps | ||
| Grid Plates (Galvanized)* 2rows | |||
| Diamond Plates (Powder Coated or Galvanized)* 3rows | |||
| 3.Heating System | Italy RIELLO G20 diesel burner *Â 1unit, 180000Kcal/h. | ||
| Heating Exchanger (SUS304 Stainless Steel material)* 1unit | |||
| 8~15 minutes reaching the baking temperature 60~80 degree Celsius | |||
| Cabinet (rock-wool insulation) *Â 1unit; Air Ducts *Â 2pcs | |||
| 4.Filter System | Primary Filter* 1set, filtering rate >Â 83% | ||
| Air-Intake Filter* 1set, filtering rate >Â 97% | |||
| Air-Exhaust Filter* 1set, filtering rate >Â 70% | |||
| 5. Air System | Air-Intake Fans* 2units, Centrifugal Fans with 4Â KW motor each | ||
| Air-Exhaust Fan* 1unit, Centrifugal Fans with 5.5 KW motor | |||
| Air velocity 0.35 m/s | |||
| Cabinet for the fans* 1unit, and Air Ducts* 3pcs, and Air Damper (electric)* 1unit | |||
| 6. Illumination | Ceiling Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | ||
| Side Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | |||
| 7. Control Panel | *1unit, including Spray Switch, Baking Switch, Light Switch, Emergency Stop, etc. | ||
| ** Included | All Hardware, Fasteners, and Sealants | ||
YANTAI EMPIRE INDUSTRY&TRADE CO.,LTD is a company making efforts to supply quality garage equipment including Frame Machine, Booth, Heater and Burner, lift, Tire Changer, Wheel Balancer,Wheel Aligner, Decoder, Key Programmer, Oil Drainer, Tools Cabinet,Air Compressor, Jack & Stand, Crane, Pressing Machine etc. Also we could supply parts and accessories for auto repairing shops, such as hydraulic cylinder for lifts, turning plate for wheel aligner, weights for wheel balancer etc.Â
Â
Our products have been selling to worldwide countries as Canada, U.S, Colombia, U.K, Ireland, Sweden, Poland, Finland, Hungary, Norway, The Netherlands, Deutschland, Denmark,Bolivia, Latvia, Slovenia, UAE, Saudi Arab, Malaysia, Mongolia ,South Africa ec.Â
Â
From various customers we learnt various experiences in manufacturing applications, and businesses.We have been improved much of the products and are always will to continuously improve.
Any need, please feel free to contact meÂ
Â
Â
Â
| Dimensions | Length | Width (mm) | Height (mm) |
| Booth Outside | 7000mm/277.6" | 5200mm/206.6" | 3500mm/141.7" |
| Booth Inside | 6900mm/271.6" | 3900mm/153.5" | 2750mm/108.3" |
| Entrance Door | Equipped with Handle &Â Lock, with tempered glass window | 3000mm/118.1" | 2700mm/106.3" |
| Personnel Door | Equipped with Handle &Â Anti-Explosion Lock,with tempered glass window | 800mm/31.5" | 2000mm/78.7" |
| Item | Total Power 16 KW; 380v/3phase/50hz | Noise <Â 80 db | |
| 1.Walls&Ceiling | EPS colorful steel skin board, Wall Panels: 50 mm thick, steel sheet thickness:0.476mm, galvanized steel roof panel. | ||
| 2.Basement System | Metal Pedestal (Galvanized), with Filter tray* 2rows & a pair of car ramps | ||
| Grid Plates (Galvanized)* 2rows | |||
| Diamond Plates (Powder Coated or Galvanized)* 3rows | |||
| 3.Heating System | Italy RIELLO G20 diesel burner *Â 1unit, 180000Kcal/h. | ||
| Heating Exchanger (SUS304 Stainless Steel material)* 1unit | |||
| 8~15 minutes reaching the baking temperature 60~80 degree Celsius | |||
| Cabinet (rock-wool insulation) *Â 1unit; Air Ducts *Â 2pcs | |||
| 4.Filter System | Primary Filter* 1set, filtering rate >Â 83% | ||
| Air-Intake Filter* 1set, filtering rate >Â 97% | |||
| Air-Exhaust Filter* 1set, filtering rate >Â 70% | |||
| 5. Air System | Air-Intake Fans* 2units, Centrifugal Fans with 4Â KW motor each | ||
| Air-Exhaust Fan* 1unit, Centrifugal Fans with 5.5 KW motor | |||
| Air velocity 0.35 m/s | |||
| Cabinet for the fans* 1unit, and Air Ducts* 3pcs, and Air Damper (electric)* 1unit | |||
| 6. Illumination | Ceiling Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | ||
| Side Lights 8*4=32pcs, 40w each, with Light Fixtures, anti-explosion design, CE &Â UL approved | |||
| 7. Control Panel | *1unit, including Spray Switch, Baking Switch, Light Switch, Emergency Stop, etc. | ||
| ** Included | All Hardware, Fasteners, and Sealants | ||
YANTAI EMPIRE INDUSTRY&TRADE CO.,LTD is a company making efforts to supply quality garage equipment including Frame Machine, Booth, Heater and Burner, lift, Tire Changer, Wheel Balancer,Wheel Aligner, Decoder, Key Programmer, Oil Drainer, Tools Cabinet,Air Compressor, Jack & Stand, Crane, Pressing Machine etc. Also we could supply parts and accessories for auto repairing shops, such as hydraulic cylinder for lifts, turning plate for wheel aligner, weights for wheel balancer etc.Â
Â
Our products have been selling to worldwide countries as Canada, U.S, Colombia, U.K, Ireland, Sweden, Poland, Finland, Hungary, Norway, The Netherlands, Deutschland, Denmark,Bolivia, Latvia, Slovenia, UAE, Saudi Arab, Malaysia, Mongolia ,South Africa ec.Â
Â
From various customers we learnt various experiences in manufacturing applications, and businesses.We have been improved much of the products and are always will to continuously improve.
Any need, please feel free to contact meÂ
Â
Â
Yikyui water well drilling rigs are designed for safety, reliability, and productivity with products to serve all of your drilling needs. Yikyui has a rich history in the water well drilling rig market that spans over 30 years and counting. As water is our most precious resource and the global demand for water increasing each year, Yikyui takes pride in offering solutions to meet this growing demand.
We have a complete line of hydraulic top-head drive drilling rigs, designed for water well drilling and other applications requiring air or mud rotary as well as down-the-hole hammer drilling methods.
Our drills provide ample power and versatility to reach target drilling depths in all types for aquifer / soil conditions and rock formations. Additionally, our rigs are highly mobile, capable of reaching the most remote locations.
Yikyui`s water well rigs come in a full range of pullback (hosting) capability and feature safe and efficient rod handling with some products offering optional hands-free rod loader systems. The rigs are also capable of pulldown for drilling in those more challenging formations. Optional features such as water injection systems, hammer lubricators, mud systems, auxiliary winches, etc. offer flexibility when configuring a rig. We also have the capability to design custom options to better serve the need of our customers.
Innovation is one of our core values and we strive to deliver innovative solutions for our customers that bring value to their operations. With reduced downtime, fuel efficiency, and by providing a safer work environment, Yikyui`s water well drilling rigs help customers grow and sustain their businesses.
Well Drilling Machine,Water Well Drilling Rig,Borehole Drilling Machine, CPTU & In-situ testing
Henan YK Prospecting Machinery Co., Ltd , https://www.yyboreholedrilling.com