Founded in 2006,Maanshan Durmapress CNC Machinery Co.,Ltd is located in the Maanshan city ,Dangtu County,close to Nanjing Airport. Our geographical position is superior and the transportation is very convenient. We have more than 320 employees, including all types of engineering and technical personnel, serving the company R&D, production, and customers' service. At the same time, we have our own sales companies in each major and medium city.
Main products:CNC Press brake,hydrauliic shearing machine,Ironworker Machine,power press machine,roof forming machine,metal baler machine
Production Details:
This shearing machine we also call swing beam shear machine. The machine is hydraulically powered or mechanically. It works by first clamping the material with a ram, A moving blade then comes down across a fixed blade to shear the material.
The workpiece material include aluminum, mild steel, stainless steel, galvanized sheet, iron sheet, and so on.
Â
1.Adjusting of the gap between blades is portable and quick. The value of the gap is indicated on a dial.
2.Adopt advanced hydraulic system, reliable and easy for maintenance.
3.Meet with international safety standard.
4.Frame welded, vibration to eliminate stress, high in rigidity, sturdy and durable. Hydraulic drive, swing beam, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder, stead&reliable performance.
5.The position of low blade can be adjusted to ensure the equilibrium of the gap after regrinding. The portable and prompt adjusted of the blade's gap, the value of gap is indicated by dial, positioning reliable.
6.The digital display devices used to the back gauge's value and the shearing times are on the front of the machine
Â
| Model | QC12Y 4X2500 |
| Cutting Thickness | 4mm |
| Cutting Width | 2500mm |
| Cutting Angle | 1°30' |
| Material strength | ≤450KN/CM |
| Travel Times | 10Time/min |
| Power | 5.5Kw |
| Dimension | 3040*1610*1620mm |
2.Standard Equipment:
Estun E21s NC control system
Powered Back guage X-axis
DELTA Inverter controlled back gauge
HIWIN Ball screws&polished rod with 0.05mm accuracy
Squaring Arm and Front Support Arms
Germany EMB Tubing connector
Germany Bosch-Rexroth hydraulic
Germany Siemens main motor
Telemecanique/Schneider Electrics
Hydraulic &Electrocal overload protection
Cutting Line Illumination and wire for shadow line cuttingÂ
Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si)
3.Safety Equipment:
-
Safety Standards(2006/42/EC)
1.EN 12622:2009+a1:2003
2.EN ISO 12100:20110
3.EN 60204-1:2006+A1:2009
Front finger protection (Safety light curtain)
South Korea Kacon Foot Switch (Level 4 of safety)
Back metal safe fence with CE standard
-
Safety relay with Monitoor the pedal switch and safety protection
FAQ :Q:Â How to get a accurate quotation from us ?
 A:Prvide us the details of material , such as metal thickness and width .
Q:You are manufacturer or trading company ?
 A: We are 100% manufacturer with 17 year's manufaturer experience.
 Q:Can you do OEM service ?
 A:Yes, we can. your design is accepted , your own logo can be used on the machine.
 Q:What's the shipping cost from china to your country ?
 A:We can send machine to your port or door address by sea or airplane. please kindly tell us your nearest port or address with postcode. we have reliable shipping agent to  insure the safe convenient and time delivery.
 Q:Do you accept LC payment ?
 A:Yes, normally our payment is 30%+70% T/T ,LC payment is also acceptable
 Q:How to operate this machine ?
 A:Video line of our factory or we send you the moive directly.
 Q:What about commissioning service ?
 A: We can offer commissioning service , the buyer need to afford plane tickets.
 Q:Do you offer teaching & training ?
 A:Training at supplier's plant
Founded in 2006,Maanshan Durmapress CNC Machinery Co.,Ltd is located in the Maanshan city ,Dangtu County,close to Nanjing Airport. Our geographical position is superior and the transportation is very convenient. We have more than 320 employees, including all types of engineering and technical personnel, serving the company R&D, production, and customers' service. At the same time, we have our own sales companies in each major and medium city.
Main products:CNC Press brake,hydrauliic shearing machine,Ironworker Machine,power press machine,roof forming machine,metal baler machine
Production Details:
This shearing machine we also call swing beam shear machine. The machine is hydraulically powered or mechanically. It works by first clamping the material with a ram, A moving blade then comes down across a fixed blade to shear the material.
The workpiece material include aluminum, mild steel, stainless steel, galvanized sheet, iron sheet, and so on.
Â
1.Adjusting of the gap between blades is portable and quick. The value of the gap is indicated on a dial.
2.Adopt advanced hydraulic system, reliable and easy for maintenance.
3.Meet with international safety standard.
4.Frame welded, vibration to eliminate stress, high in rigidity, sturdy and durable. Hydraulic drive, swing beam, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder, stead&reliable performance.
5.The position of low blade can be adjusted to ensure the equilibrium of the gap after regrinding. The portable and prompt adjusted of the blade's gap, the value of gap is indicated by dial, positioning reliable.
6.The digital display devices used to the back gauge's value and the shearing times are on the front of the machine
Â
| Model | QC12Y 4X2500 |
| Cutting Thickness | 4mm |
| Cutting Width | 2500mm |
| Cutting Angle | 1°30' |
| Material strength | ≤450KN/CM |
| Travel Times | 10Time/min |
| Power | 5.5Kw |
| Dimension | 3040*1610*1620mm |
2.Standard Equipment:
Estun E21s NC control system
Powered Back guage X-axis
DELTA Inverter controlled back gauge
HIWIN Ball screws&polished rod with 0.05mm accuracy
Squaring Arm and Front Support Arms
Germany EMB Tubing connector
Germany Bosch-Rexroth hydraulic
Germany Siemens main motor
Telemecanique/Schneider Electrics
Hydraulic &Electrocal overload protection
Cutting Line Illumination and wire for shadow line cuttingÂ
Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si)
3.Safety Equipment:
-
Safety Standards(2006/42/EC)
1.EN 12622:2009+a1:2003
2.EN ISO 12100:20110
3.EN 60204-1:2006+A1:2009
Front finger protection (Safety light curtain)
South Korea Kacon Foot Switch (Level 4 of safety)
Back metal safe fence with CE standard
-
Safety relay with Monitoor the pedal switch and safety protection
FAQ :Q:Â How to get a accurate quotation from us ?
 A:Prvide us the details of material , such as metal thickness and width .
Q:You are manufacturer or trading company ?
 A: We are 100% manufacturer with 17 year's manufaturer experience.
 Q:Can you do OEM service ?
 A:Yes, we can. your design is accepted , your own logo can be used on the machine.
 Q:What's the shipping cost from china to your country ?
 A:We can send machine to your port or door address by sea or airplane. please kindly tell us your nearest port or address with postcode. we have reliable shipping agent to  insure the safe convenient and time delivery.
 Q:Do you accept LC payment ?
 A:Yes, normally our payment is 30%+70% T/T ,LC payment is also acceptable
 Q:How to operate this machine ?
 A:Video line of our factory or we send you the moive directly.
 Q:What about commissioning service ?
 A: We can offer commissioning service , the buyer need to afford plane tickets.
 Q:Do you offer teaching & training ?
 A:Training at supplier's plant
Cat Parts,Belt Cat,Oil Filter Cat,Genuine Original Air Filter
JiLin LangYi Mechanical Equipment Company Ltd. , https://www.vxceo.com