DC inverter mosfet TIG welder(WSE-200)
Features:
1. Adopting advanced inverter technique and excellent imported raw material, high working efficiency, small in size and light in weight.
2. High frequency pressyrization arc starting and pulse heat arc starting design which is easy for arc starting, wide rang for current adjusting and surperior of performance.
3. Protection equipment are set internally to prevent over heat, over current, lack of voltage etc. To ensure safety operation.
4. Unique design of output characteristic, suitable for filler rod welding and esthetic welding seam.
5. Strong adaptability to grid, high duty cycle and suitable for continuous working of factory.
6. Simple structure, excellent technics, durability, reliablity and easy maintenance.
7. Ideal equipment to weld aluminium, stainless steel, carbon steel, pure copper(red copper) etc.
8. One machine serves serval purposes and stable performance, high efficiency and energy-saving.
9. Adopting passive power factor correction, and high in power factor.
Standard accessories:
1, 3.0m cable TIG torch welding with holder 1PC
2, 1.5m cable with electrode holder 1PC
3, 1.5m cable with earth clamp 1PC
4, hand-held shield with glass 1PC
Specification:
Â
Features:
1. Adopting advanced inverter technique and excellent imported raw material, high working efficiency, small in size and light in weight.
2. High frequency pressyrization arc starting and pulse heat arc starting design which is easy for arc starting, wide rang for current adjusting and surperior of performance.
3. Protection equipment are set internally to prevent over heat, over current, lack of voltage etc. To ensure safety operation.
4. Unique design of output characteristic, suitable for filler rod welding and esthetic welding seam.
5. Strong adaptability to grid, high duty cycle and suitable for continuous working of factory.
6. Simple structure, excellent technics, durability, reliablity and easy maintenance.
7. Ideal equipment to weld aluminium, stainless steel, carbon steel, pure copper(red copper) etc.
8. One machine serves serval purposes and stable performance, high efficiency and energy-saving.
9. Adopting passive power factor correction, and high in power factor.
Standard accessories:
1, 3.0m cable TIG torch welding with holder 1PC
2, 1.5m cable with electrode holder 1PC
3, 1.5m cable with earth clamp 1PC
4, hand-held shield with glass 1PC
Specification:
| Model | WSE-200 | WSE-250 | WSE-315 |
| Main Voltage(V) | 110-240 | 220-415 | 220-415 |
| Frequency(HZ) | 50/60 | 50/60 | 50/60 |
| Rated Input Capacity(KVA) | 4.5 | 6.3 | 8.9 |
| Power Facto | cosø0.93 | cosø0.93 | cosø0.93 |
| Max No-load Voltage(V) | 56 | 56 | Â 56 |
| Current Range(A) | 20-200 | 20-250 | 20-315 |
| Â Rated Duty Cycle | 85% | 85% | Â 85% |
| Insulation Class | B | B | Â B |
| Protection Degree | IP21S | IP21S | IP21S |
| Packing Dimension(cm) | 50*30*36 | 50*30*36 | 50*30*36 |
| Gross Weight(KG) | 28 | 33.5 | Â Â 37.5 |
Made of a new type of corrosion resistant electric heater, used for all kinds of corrosive liquid heating.It has good aging resistance and good winding performance. It adopts low surface load design.The outer layer of the stainless steel or shape heating tube is covered with a fluoroplastic sleeve. The power requirement should be controlled below 1.5w /cm2, preferably not exceeding 2W/cm squared.
Ptfe Sheathed Immersion Heater Jacket,Teflon Heater,PTFE
Guangzhou Quanxu Technology Co Ltd , https://www.skysilmattingagent.com