Horizontal Type Induction Heating Quenching Machine for 500mm Roller

Horizontal Type Induction Heating Quenching Machine for 500mm Roller
Quenching Machine's Major Scope of Application:

Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
 
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
 
2.Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
 
3. Various electric tools, such as gear and axes.
 
4. Quench for machine tools, such as lathe deck and guide rail.
 
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
 
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Functional features:
1. Industrial digital control system, advanced performance, easy to use debugging, to meet the maximum etent of the comples workpiece quenching needs;

2. Quenching ways: continuous scan quenching, quenching at the same time, piecewise continuous scan hardening(segmented by the program settings, without limit switch, the same below), sub-quenching;

3. The electrical control system of the machine for which the quenching and cold water control interface, according to the technical requirements of the quenching process and cooling process control;

4. Low running costs and low drive power of workpiece running motor;

5. Profiles fuselage structure, low cost , light weight, economical and practical;

6. Easy maintenance, low failure rate, no leakage;

7. The high degree of automation, high procuction efficiency;

8. Rail linear bearings, high precision, low friction, long life;

9. Balance weight of counterweight device by sprockets and chains.

Main technical parameters: Horizontal Type Induction Heating Quenching Machine for 500mm Roller
Quenching Machine's Major Scope of Application:

Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
 
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
 
2.Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
 
3. Various electric tools, such as gear and axes.
 
4. Quench for machine tools, such as lathe deck and guide rail.
 
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
 
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Functional features:
1. Industrial digital control system, advanced performance, easy to use debugging, to meet the maximum etent of the comples workpiece quenching needs;

2. Quenching ways: continuous scan quenching, quenching at the same time, piecewise continuous scan hardening(segmented by the program settings, without limit switch, the same below), sub-quenching;

3. The electrical control system of the machine for which the quenching and cold water control interface, according to the technical requirements of the quenching process and cooling process control;

4. Low running costs and low drive power of workpiece running motor;

5. Profiles fuselage structure, low cost , light weight, economical and practical;

6. Easy maintenance, low failure rate, no leakage;

7. The high degree of automation, high procuction efficiency;

8. Rail linear bearings, high precision, low friction, long life;

9. Balance weight of counterweight device by sprockets and chains.

Main technical parameters:

Laser Cladding Powder

Nickel Based Laser Cladding Powder

Ni base alloy powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has good wettability, corrosion resistance and high temperature self-lubricating effect, and is used in components with heat resistance, corrosion resistance and thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser cladding, the No means hardness of powder. Inconel 625 and 718 has good corrosion property under higher temperature, also widely used for laser cladding process.

Cobalt based Laser Cladding Powder

Cobalt-based alloy powder is the cemented carbide resistant to various types of wear and corrosion as well as high temperature oxidation. That is, the so-called cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based alloy is mainly composed of cobalt, containing a considerable amount of nickel, chromium, tungsten and a small amount of molybdenum, niobium, tantalum, titanium, Alloying elements such as lanthanum, and occasionally a class of alloys containing iron.

Co-based self-fluxing alloys have good high temperature performance and wear resistance and corrosion resistance, and are used in petrochemical power, metallurgy and other industrial fields where they are wear-resistant, corrosion-resistant and high-temperature resistant.

Iron based Laser Cladding Powder

The work pieces required for laser cladding and manufacturing in the actual industry are mainly carbon steel and cast steel. The Fe-based alloy is close to the base material in composition and has good wettability. The advantage of Fe base powder is lower cost and good wear resistant of cladding layer. As a result, it`s the most widely used for laser cladding process. It is suitable for parts that require local wear resistance and are easily deformed.

WC blended Laser Cladding Powder

Tungsten carbide blended with Ni alloy powder is the best choice for wear resistant work piece. This unique process can bring excellent wear, corrosion and high temperature resistant. Our blend powder can achieve different portion of WC from 35% to 60% without crack under suitable cladding parameter.

Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.egretgeotools.com