How to buy dead fly bike

How to buy dead fly bike

The flywheel of an ordinary bicycle is "living", so when the pedal is pressed down, the wheel follows and the wheel can still rotate when it is not stepped on. The "flying" flywheel, which fixes the chain and the rear wheel, must turn the wheel to the chain, and people must step on it, which embodies a "dead" word. Therefore, in the course of death flying, people must always step on. Just because the flywheel is dead, the person who rides the bike can control the rear wheel by pedaling to decelerate and brake, and also can control the car very well, thus playing a variety of tricks. Dead fly is simple, no brakes, no speed changes, and it is light.

In recent years, the death-flying bicycle has been loved by many riders. The charm is that most of the dead-flying enthusiasts like to buy their own separate parts and then assemble them. But how much do you know about dead flying? How can I buy a suitable dead fly?

1. Select the basic principle of the dimension: Calculate the length of the top tube, which is roughly equal to the length of the arm, scapula, and wrist. Such as the height of 173 cm, the length is about 53 cm, so the time to buy a frame must be selected TT is equal to or slightly less than 53 cm. This can consult the store in detail, not a fan friend does not enter.

2, material: This determines the weight and durability of the body, the choice of this part is a matter of opinion. The basic consideration logic: The single-vehicle design pursues the lightweight of the vehicle body. This purpose can be achieved through the use of advanced materials, the design of the frame structure, or the precise manufacturing method. Frames that are more than one price point are also quite durable, so the ultimate guide to buying is to choose your favorite shape! On the other hand, if you are newbies, it is recommended to use a cheap and durable stainless steel frame.

3, head bowl group (leader Palin), responsible for the faucet fixed on the frame and provide active joints. The selection of this part is done in three steps: 1) Select the specifications that match the frame set; 2) Select the color and style; 3) Select the grade. In general, there are two basic specifications for the front head set to pay attention to. One is the diameter of the front head set of the car price, and the other is whether the front fork is threaded or non-threaded.

4. The color and style of the front head set have the effect of finishing touches on the appearance of the entire trolley. Before buying, it is still recommended to pick a little color and appearance. As for the front row of headsets, due to the large drop in the unit price, the vehicle type is roughly in terms of precision and durability. If it is just getting started, it is recommended that you buy a cheap product with a sealed palin, ride it up and it will be easy to maintain.

"Death" cycling has become very popular in foreign countries. In addition, there is a saying that "dead fly" was a former foreign postman, and was later added a fashion element to become a tidal car. Burn the enthusiasm and join in your own death flight.

MAPP GAS

Mapp Gas can be used in combination with oxygen for heating, soldering, brazing and even welding due to its high flame temperature of (3600 °F) in oxygen. For small-scale welding with Mapp Gas this is not a serious problem,. Mapp Gas is also used in combustion with air for brazing and soldering, where it has a slight advantage over competing propane fuel due to its higher combustion temperature of (3,600 °F) in air.

High Quality MAPP GAS,Welding Gas,Brazing Gas,Soldering Gas

Zhejiang Jinze Refrigerant Co.,Ltd , https://www.uiszl.com

This entry was posted in on