How to maintain the swirl gas pump

For any kind of equipment to be used for a long period of time, necessary maintenance and maintenance are indispensable. The same is true when using a vortex pump. To extend its service life, it is necessary to master the correct maintenance method.

1. The bearings of the vortex pump need to be maintained regularly, and the bearing can be added with butter to prevent the bearing from being damaged during operation. Bearings in operation, to ensure adequate smoothness, reduce its degree of wear, can extend the life of the bearing.

2. The shaft power and pressure of the motor appear to be proportional. When the load of the motor is heavy, the pressure of the vortex pump will increase. Therefore, the pressure relief valve should be used frequently in the motor to release the excess pressure and protect the motor so that the motor can be used normally.

3, special parts need special maintenance, when the operator does not know how to maintain the special parts, do not maintain and maintain the special parts, so that the professional maintenance personnel on the special zero vortex pump Parts for maintenance.

During the operation of the vortex pump, if the current of the motor is too large, it will directly affect the pressure and vacuum degree of the motor. Therefore, the cross-sectional area of ​​the large outlet should be used at the outlet of the vortex pump to avoid causing the motor current. is too big. In addition, in the maintenance of the vortex pump, some parts need to be disassembled. Therefore, the operator must master the installation method of the vortex pump so that the vortex pump can be installed properly after being disassembled.