Office gate channel working principle

The office gate channel is now also included in the procurement scope of office products. Its installation office will provide employees with a safe working environment and provide a convenient environment.

Office gates Here is the gates installed in the office area of ​​the office. It is mainly used for personnel access restrictions in important work areas. Only authorized personnel are allowed to enter and exit to prevent non-workers from entering. Give your work environment a safe and convenient.

Office gate channel advantage

Because office gates are commonly used in swing gates and wing gates, and the appearance is plastic, it will meet the individual needs of different users according to the specific usage scenarios.

Office gate channel working principle

After the power is turned on, the gate system enters the working state after a few seconds; when the authorized personnel pass the gate channel, the card reader will read the valid authorization card, and the buzzer will make a pleasant sound, prompting the pedestrian to read the card successfully; The information read from the card is judged and processed, and an application is sent to the main control board to pass the gate signal; the main control board receives the signal of the card reader and the infrared sensor, and after comprehensive processing, sends the signal to the direction controller and the motor. The effective control signal turns the direction mark into the green arrow pass sign. At this time, if the gate system is in the normally closed mode, the motor runs, the limit switch controls the motor rotation angle, and the gate is opened (the motor does not operate in the normally open mode) Pedestrians are allowed to pass; if unauthorized access is made, the gate system will issue an alarm and the passer will be blocked from the door.

Office gate channel case

I hope that the installation of the office gate channel will give you a guarantee and image.