SAFE HI-TEC Security X Ray Luggage Scanner for Train Stations SA100100
SA100100 Multi-energy x-ray security inspection equipment which are designed for the security inspection of the big baggage, luggage and cargo etc.It's very popular model with scanning luggage size less than 1m(width)*1m(height).It's widely used in the airport, logistics, subways, bus station, hotels etc.
Technic Specifications:Â
| Physical Specifications | Â |
| Unit weight (kgs) | 1100 |
| Unit size (mm) | 3638.5(L)*1295(W)*1916.5(H) mm |
| after packed in wooden pallet -Â | Â |
| Gross weight (kgs) | 1300 |
| Packing size | #1: 290*150*220cm |
| Â | #2: 113*91*142cm |
| Â | Â |
| General Specifications | Â |
| Tunnel size(mm) | 1000(L)*1000(W) |
| Conveyor Speed(m/s) | 0.22 |
| Conveyor height(mm)Â | 338.5 |
| Conveyor Max Load(kgs) | 200 |
| X ray dose per each inspection | 1.5 μGy |
| X ray leakage | <0.25 μGy / h |
| Penetration | 30- 32mm steel |
| Wire Resolution | dia 0.0787mm copper wire (AWG40) |
| Penetration Resolution | dia 0.16mm copper wire (AWG34) under three-step aluminum wedge 9.5mm, 15.9mm, 22.2mm |
| Spatial resolution: | dia1.0mm,Vertical: dia1.0mm |
| Power Consumption | max. 1KW |
| Noise | < 58 dB |
| Film Safety | Guarantee ASA/ISO1600 Film |
| Â | Â |
| X-ray Generator (single) | Â |
| Anode Voltage | 160 KVÂ |
| Anode power | 0.4-1.2mA (adjustable) |
| Generate angle | 80 degree upward |
| Generate direct | from bottom to top |
| Cooling / Duty Cycle | Oil Cooling /100%Â |
| Brand | Made in China |
| Â | Â |
| Image System | Â |
| X-ray Sensor | L-Shaped Photodiode Array (multi-energetic)Â Â , 12bit Deep |
| Image Display | High resolution of 1024 * 1280 pixel; Image Grey Level: 4096 |
| Image Enhancement | 1-64times enlargement continuity, Color/BW, negative, high/low penetration, organic /inorganic Stripping, general enhancement, and pseudo color, etc. |
| Image Recall | Â All preceding images recallable, retrieval |
| Explosives & Narcotics Detection | Explosives & narcotics alarm and highlight according to atomic number signature |
| High Density Region Alarm | Impenetrable region alarm and highlight, for possible concealing of threats and contrabands |
| Threat Image Projection | Inserting fictional, but realistic images of threat items into baggage during screening operation, for maintenance of vigilance, as well as training and assessment of image identification capability |
| Image Archive | Up to 100,000 images stored automatically, enable transferring to USB disk, and converting to JPG, BMP and other general formats |
| Miscellaneous Functions | Time/date display, counters, user management, system-on/X-ray-on timers, power on self test, built-in diagnostic facilities, dual-direction scanning, system log, system standby and stimulant training, ADS etc. |
| Network Applications | Multiple remote applications available based on Ethernet LAN and windows platform, such as image centralized storage and identify, recheck workstation, and network TIP, etc ( Optional) . |
| Images process | 24bit real time processing ,4colors analysis, Images displayed marked date and ID NO ,Count the number of bags |
| Â | Â |
| Operating Environment | Â |
| Operation temperature/Humidity |  0ºC-45ºC / 5%-95%(non-condensing) |
| Storage Temperature/Humidity |  -40ºCto 70ºC / 5%-95%(non-condensing) |
| Operation Power |  220VAC(±10%) 50±3Hz (Optional: 100VAC,110VAC,120VAC,200VAC) |
| UPS | Â 15mins, 30mins, 60mins etc, optional |
| Â | Â |
| Computer and other | Â |
| Monitor | High Resolution Color, LCD Accord, 17inch |
| Hard Disk | SEAGATE 500G 3.5" |
| CPU | G1610 2.6G |
| Storage | 2GB 1600MHz DDR3 Innodisk |
| Main board | H61 SYM76993VGGAÂ |
| Â | Â |
Technology features:
1. Â Shiny clear images; High-resolution
2. Multi-energy penetration system
3. Â Multi-functions image processing system
4. Â EI-TIP(Threat Image Projection) function
 5. Any selection of the image magnified area
 6. Collection the high-speed parallel of detection data
 7. Removable structure with independent console
 8. Support JPG&BMP image transformation format to USB
 9. Big tunnel design with multi-function operator interface
 10. Portable separate structural design, equipped with independent operator's desk
RFQ:
Are you manufacturer?
Yes, we are professsional manufacturer of security threats detection system in south of China.
Stable quality and foremost service always be the key that we focus on.
How many days we can get the machine after payment?
Normally, with stock only need 3-5 days for leading time.
Without stock, need 10-15 days to manage the production.
Delivery by sea, air for your choices.Â
How about the warranty and services?
Provide one year warranty and lifetime technic support.
Accept to send our engineer to your country for training in additional cost.
Free training one-on-one in our factory for free.
SAFE HI-TEC Security X Ray Luggage Scanner for Train Stations SA100100
SA100100 Multi-energy x-ray security inspection equipment which are designed for the security inspection of the big baggage, luggage and cargo etc.It's very popular model with scanning luggage size less than 1m(width)*1m(height).It's widely used in the airport, logistics, subways, bus station, hotels etc.
Technic Specifications:Â
| Physical Specifications | Â |
| Unit weight (kgs) | 1100 |
| Unit size (mm) | 3638.5(L)*1295(W)*1916.5(H) mm |
| after packed in wooden pallet -Â | Â |
| Gross weight (kgs) | 1300 |
| Packing size | #1: 290*150*220cm |
| Â | #2: 113*91*142cm |
| Â | Â |
| General Specifications | Â |
| Tunnel size(mm) | 1000(L)*1000(W) |
| Conveyor Speed(m/s) | 0.22 |
| Conveyor height(mm)Â | 338.5 |
| Conveyor Max Load(kgs) | 200 |
| X ray dose per each inspection | 1.5 μGy |
| X ray leakage | <0.25 μGy / h |
| Penetration | 30- 32mm steel |
| Wire Resolution | dia 0.0787mm copper wire (AWG40) |
| Penetration Resolution | dia 0.16mm copper wire (AWG34) under three-step aluminum wedge 9.5mm, 15.9mm, 22.2mm |
| Spatial resolution: | dia1.0mm,Vertical: dia1.0mm |
| Power Consumption | max. 1KW |
| Noise | < 58 dB |
| Film Safety | Guarantee ASA/ISO1600 Film |
| Â | Â |
| X-ray Generator (single) | Â |
| Anode Voltage | 160 KVÂ |
| Anode power | 0.4-1.2mA (adjustable) |
| Generate angle | 80 degree upward |
| Generate direct | from bottom to top |
| Cooling / Duty Cycle | Oil Cooling /100%Â |
| Brand | Made in China |
| Â | Â |
| Image System | Â |
| X-ray Sensor | L-Shaped Photodiode Array (multi-energetic)Â Â , 12bit Deep |
| Image Display | High resolution of 1024 * 1280 pixel; Image Grey Level: 4096 |
| Image Enhancement | 1-64times enlargement continuity, Color/BW, negative, high/low penetration, organic /inorganic Stripping, general enhancement, and pseudo color, etc. |
| Image Recall | Â All preceding images recallable, retrieval |
| Explosives & Narcotics Detection | Explosives & narcotics alarm and highlight according to atomic number signature |
| High Density Region Alarm | Impenetrable region alarm and highlight, for possible concealing of threats and contrabands |
| Threat Image Projection | Inserting fictional, but realistic images of threat items into baggage during screening operation, for maintenance of vigilance, as well as training and assessment of image identification capability |
| Image Archive | Up to 100,000 images stored automatically, enable transferring to USB disk, and converting to JPG, BMP and other general formats |
| Miscellaneous Functions | Time/date display, counters, user management, system-on/X-ray-on timers, power on self test, built-in diagnostic facilities, dual-direction scanning, system log, system standby and stimulant training, ADS etc. |
| Network Applications | Multiple remote applications available based on Ethernet LAN and windows platform, such as image centralized storage and identify, recheck workstation, and network TIP, etc ( Optional) . |
| Images process | 24bit real time processing ,4colors analysis, Images displayed marked date and ID NO ,Count the number of bags |
| Â | Â |
| Operating Environment | Â |
| Operation temperature/Humidity |  0ºC-45ºC / 5%-95%(non-condensing) |
| Storage Temperature/Humidity |  -40ºCto 70ºC / 5%-95%(non-condensing) |
| Operation Power |  220VAC(±10%) 50±3Hz (Optional: 100VAC,110VAC,120VAC,200VAC) |
| UPS | Â 15mins, 30mins, 60mins etc, optional |
| Â | Â |
| Computer and other | Â |
| Monitor | High Resolution Color, LCD Accord, 17inch |
| Hard Disk | SEAGATE 500G 3.5" |
| CPU | G1610 2.6G |
| Storage | 2GB 1600MHz DDR3 Innodisk |
| Main board | H61 SYM76993VGGAÂ |
| Â | Â |
Technology features:
1. Â Shiny clear images; High-resolution
2. Multi-energy penetration system
3. Â Multi-functions image processing system
4. Â EI-TIP(Threat Image Projection) function
 5. Any selection of the image magnified area
 6. Collection the high-speed parallel of detection data
 7. Removable structure with independent console
 8. Support JPG&BMP image transformation format to USB
 9. Big tunnel design with multi-function operator interface
 10. Portable separate structural design, equipped with independent operator's desk
RFQ:
Are you manufacturer?
Yes, we are professsional manufacturer of security threats detection system in south of China.
Stable quality and foremost service always be the key that we focus on.
How many days we can get the machine after payment?
Normally, with stock only need 3-5 days for leading time.
Without stock, need 10-15 days to manage the production.
Delivery by sea, air for your choices.Â
How about the warranty and services?
Provide one year warranty and lifetime technic support.
Accept to send our engineer to your country for training in additional cost.
Free training one-on-one in our factory for free.
Plastic Injection Molding Factory.We are advanced China Plastic Injection Molding manufacturers. Our Plastic Injection Molding manufacturing methods are extremely accurate and fast. They can provide unlimited rapid prototype plastic injection molding capabilities for a wide variety of high-volume products. The method is also used for low volume, high-quality plastic parts for everything from toy cars to giant television screens. Rapid prototyping is the process of designing and creating a new product or component using plastic injection molds. It is a critical process because it helps identify new product characteristics by testing them over again before a product goes to production.Plastic injection molds allow designers and engineers to create detailed models from digital designs that can then be brought to life into a physical product. This kind of design sharing provides a tremendous advantage for companies trying to reduce product development costs.
Many rapid injection molding tools include tools that are designed to assist the manufacturer with their overall production efforts. These tools can offer you a number of additional services including computer software designed to help you streamline your production efforts and increase your profitability. By streamlining your efforts, you can expect to see a significant increase in your production rate and efficiency.
RongNa offer OEM/ODM custom rapid prototype plastic injection tooling which can help you reduce the time necessary to create new parts and can save you valuable money on material costs.
The Finishing Option For Injection Molding
.Matte
.polished,
.sprayed,
.screen printing,
.pad printing,
.thermal transfer,
.water transfer,
.laser engraving,
.electrophoresis (water plating),
.vacuum coating,
.biting (etching, skin texture) for plastic molds
Advantages Of Plastic Injection Molding From RongNa
According to the customer's requirement to choose the Rapid tooling or the common mold,multi - cavities to save costs. Dozens of material and finishing options available.
analysis before quoting, also will suggest the better design way.
send the mold desgin for checking before tooling make.
Procuring parts on demand, without MOQ.
All products are inspected before shipment.
Injection Molding,Polycarbonate Injection Molding,Custom Injection Molding,Thermoplastic Injection Molding
Ningbo Rongna Technology Co.,Ltd , https://www.machiningsservice.com