Stainless Steel Body/Plastic Pneumatic Actuator/Angle Seat Valve (GAYASV)

Stainless Steel Body/Plastic Pneumatic Actuator/Angle Seat Valve (GAYASV)
Features:
1.Visual position indicator: the limit switch or emergency manual device.
 
2.Easy to install: pneumatic head can rotate 360 'to 360' even limit switch can be 
rotated. Easily to install one or two limit switches.
 
3.Advanced pneumatic controller: low abrasion of piston structure, large capacity
 and low consumption volume. Internal components self lubricating maintenance free.
 
4.Has a variety of control mode: normally open, normally closed, double-action.
 
5.Requires a smaller pneumatic actuators: fluid flow from the stem above the head.
 
6.Easy connections: MAMUR standard connection embedded metal connectors. 
Optional smaller control head.
 
7.Long life guide: stem wedge fluoro lung (PTEE) seal prevent dirt into. Self
 lubricating maintenance free. Stem by special treatment to ensure that the best fixed
 position and can automatic correction.
 
8. No water hammer effect, fluid flow from stem below the water hammer (water 
impact) is absorbed.
 
9. Advanced body organization: flow Angle block 30% larger than normal smaller
 fluid flow better. 
 
 Parameters:
Working pressure:0-25bar                  
Medium temperature range:-10ºC~180ºC
Medium viscosity:Max600cst(m/s)     
Working temperature range:-10ºC~+60ºC
Material of body: stainless steel 304/316    
Thread end:G1/2"~G3"
Applicable mediums:water,steam,gas,Acid solution
 
Control function:nominal closed,nominal open. 
  Stainless Steel Body/Plastic Pneumatic Actuator/Angle Seat Valve (GAYASV)
Features:
1.Visual position indicator: the limit switch or emergency manual device.
 
2.Easy to install: pneumatic head can rotate 360 'to 360' even limit switch can be 
rotated. Easily to install one or two limit switches.
 
3.Advanced pneumatic controller: low abrasion of piston structure, large capacity
 and low consumption volume. Internal components self lubricating maintenance free.
 
4.Has a variety of control mode: normally open, normally closed, double-action.
 
5.Requires a smaller pneumatic actuators: fluid flow from the stem above the head.
 
6.Easy connections: MAMUR standard connection embedded metal connectors. 
Optional smaller control head.
 
7.Long life guide: stem wedge fluoro lung (PTEE) seal prevent dirt into. Self
 lubricating maintenance free. Stem by special treatment to ensure that the best fixed
 position and can automatic correction.
 
8. No water hammer effect, fluid flow from stem below the water hammer (water 
impact) is absorbed.
 
9. Advanced body organization: flow Angle block 30% larger than normal smaller
 fluid flow better. 
 
 Parameters:
Working pressure:0-25bar                  
Medium temperature range:-10ºC~180ºC
Medium viscosity:Max600cst(m/s)     
Working temperature range:-10ºC~+60ºC
Material of body: stainless steel 304/316    
Thread end:G1/2"~G3"
Applicable mediums:water,steam,gas,Acid solution
 
Control function:nominal closed,nominal open. 
 

TGIC For Exterior Powder Coating

Application:

TGIC is mainly used as Curing Agent for pure polyester powder coating, also used to produce electrical insulation materials, laminated sheeting, printed circuits, tools, adhesives,, stabilizer for plastic, etc. It has good weather resistance due to its very stable chemical properties. It provides good reactivity because of its free functional epoxide groups when get mixed with polyester resins. No VOC will be emission during curing process.

We are in a good position not only to supply you high quality machinery, but also the excellent after sales service. Well-trained engineers will offer you any technical support.

Our Advantage & Service:

-Technical Support Online Service Provided
According to customer's requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.

-On-site Training Service Provided

In customer factory, we provide all kinds of training, including installation, commissioning

-Long-term Maintenance Provided

In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.

-Spare Parts Replacement and Repair Service Provided

Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers' requirements. Ensure advanced craft, good material and high precision.

-Formulation Provided (our advantage)

Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.

Triglycidyl Isocyanurate,Powder Coating Outdoor Tgic,Curing Agent Tgic,Powder Coating Good Weather Resistance Tgic

Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com