The wading insurance is also called engine wading loss insurance, which belongs to an additional insurance in the commercial insurance of motor vehicles. It can compensate for the losses caused by the insurance vehicles wading on the accumulated water surface or after the engine is flooded. According to Sun Hongsi, marketing officer of China Life Insurance Beijing Co., Ltd. in Heishan, according to the Motor Vehicle Commercial Insurance Demonstration Clause issued by the Insurance Industry Association in 2012, the engine wading loss insurance covers the inflow of the insured motor vehicle during use. The resulting direct damage to the engine, the insurance coverage of a 15% absolute deductible. The wading insurance provisions of various insurance companies are roughly the same as the above, but there are some differences in the description of insurance liabilities.
Sun Hongsi said that the type of insurance that is closely related to the wading insurance is the vehicle loss insurance as the main insurance, such as the motor vehicle loss insurance, which is the main insurance in the Motor Vehicle Commercial Insurance Model Clause issued by the Insurance Industry Association in 2012. The responsibility includes the direct loss of the insured motor vehicle due to heavy rain or flooding, but the engine damage caused by the engine flooding is usually listed as one of the cases of liability exemption. As a supplementary insurance, wading insurance is a supplementary relationship with vehicle loss insurance. Under what circumstances can you be compensated according to the vehicle loss insurance and what can only be compensated according to the wading insurance?
For the upcoming rainy season, due to disputes that may occur with motor vehicles wading, Jia Hui explained that if the engine is flooded due to heavy rain, the driver should no longer force the vehicle to start. In this situation, the engine is started again. It is easy to cause engine damage or even scrap. The losses caused by the heavy rain causing the engine to start up again after entering the water are generally not within the scope of the vehicle damage insurance compensation. If the insurance coverage for the wading insurance is obtained, compensation can be obtained. In addition, as a result of rainstorms leading to engine flooding, if the driver does not start the vehicle again, in the event of losses (including possible engine damage), claims can be made through the vehicle loss insurance. For road surface water after rain, which causes water damage to the engine, only insured vehicle damage insurance is not compensable. Jia Hui said that the water area after the rain is a condition that the driver can avoid. Only the insurance coverage for wading insurance can be compensated.
For the current associative water insurance accessory products launched by many insurance companies, Life Life Insurance Co., Ltd. believes that from the specific design and marketing of products, the differences between products are narrowing, and customers can choose according to specific needs. In the case cited by Jia Hui above, she believes that claims should be settled in accordance with the specific legal procedures and actual conditions. It is not that the customer will do everything after buying the relevant product.
Jia Hui said that in actual operation, insurance companies should make clear instructions on the insurance products and related insurance clauses when they sell motor vehicle damage insurance and wading insurance, and in particular, the disclaimer on vehicle damage insurance should be based on its contents and laws. Consequences, etc. actively perform the interpretation or notification obligation to the applicant, otherwise the exemption clause does not have legal effect. In practice, there are no cases in which insurance companies have been found to be responsible for insurance liabilities because the insurance company has not fully performed its stated obligations. Only on the basis of good faith, allowing consumers to make clear choices can avoid unnecessary disputes and protect the interests of insurance companies.
Welded wire mesh is made of high quality low carbon steel wire, galvanized wire, or stainless steel wire, through automation precision machinery equipment line of welding processing. Welded wire mesh can be divided into galvanized welded wire mesh, Stainless Steel Welded Wire Mesh and PVC etc. What we mentioned by the surface treatment methods, including cold-dip (plating), hot-dip and PVC plastic coated, etc. They are for iron material , so to plasticizing processing, such as surface passivation can make welding net with smooth surface, mesh uniform, solder joints strong, local stable machining performance, good wear resistance, good anti-corrosive property. There are two kinds of welded wire mesh products: one is a kind of rolls, generally is 30 or 50 meters per roll, another one is sheet, suitable for wire diameter thicker size, it can according customer requirements to process customized.
Welded Wire Mesh,Welded Mesh,Wire Mesh Panels,Welded Wire Panels
Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com