Plastic material: ABS
Mold Steel: 718
Mould Standard: DME
Injection System: Side gate
Ejector System: Ejector Pin
High quality
Reasonable price
On time delivery
Good After-sale service
Strict quality control
All the mould are automotic.
JSL Mould Quality Control
For the Q/C of mould, there are 3 steps:
1. Mould Material Q/C
- Mould Steel Checking(Hardness, flaw detection)
- Mould Standard Spare Parts Checking(hardness, size, flaw checking)
2. Mould Making Process Q/C
- design checking (part design, mould design, mould engineering drawing)
- checking each part of mould's size after machining, according to 2D drawing
- mould testing(check mould running condition)
3. Check with customer's requirement again before mould shipping.
| Product Name | twin tub washing machine plastic mould |
| Product material | ABS |
| Core& Cavity Steel | 718 |
| Steel hardness: | HRC34-38 |
| Mould Standard | DME, etc |
| Cavity Number | Single |
| Injection System | side gate |
| Ejector System | ejector pin+ejector cylinder |
| mould base |
S50C Â |
| Cycle Time |
50S Â |
| Tooling lead time | 60DAYS |
| Mould life | 1, 000, 000SHOTS |
| Quality assurance | ISO9001 |
| Specification | According to client' s requirements |
| Â | Â |
| Our Advantage | Â Â Â Â Â 1. High quality |
| Â Â Â Â Â 2. Reasonable price | |
| Â Â Â Â Â 3. On time delivery | |
| Â Â Â Â Â 4. Good After-sale service | |
| Â Â Â Â Â 5. Strict quality control | |
| Â Â Â Â Â 6. All the mould are automotic. | |
| Â | Â |
| Offer you | In-time response on letters, telephone calls or fax |
| In-time supply the quotation and mould designs | |
| In-time communication on the technical points | |
| In-time sending pictures for the mould machining progress and mould finishing schedule | |
| In-time mould test and sample delivery | |
| In-time mould delivery. | |
|
plastic furniture mould | |
| 1. Samples/Drawing & Requirement from you | |
| 2. Mould design: we will Communicate& Exchange the opinion with you after you place order. | |
| 3. Material Purchase: Steel cutting and Mould base tooling. Â | |
| 4. Assembling. | |
| 5. Inspection of mould: following and controlling the tooling processing. | |
| 6. Mould testing: We will inform you the date. Than will send the sample' s inspection report& injection parameters with the sample to you! | |
| 7. Your instruction & confirmation for shipment. | |
| 8. Ready made mould before packing. | |
| Â | Â |
|
For more information please contact us. Â | |
Solar energy equipment with aluminum oxide aluminum alloy material, light structure, mechanical properties, form a complete set of slide block can be in to locking location set directly into the aluminum guide card slot, fixed by screw bolt can lock, overcomes the existing technology of fasteners from one end of the section along the card slot glide to locking point, realizes the profiles and rapid disassembling and positioning of fasteners,Greatly improve work efficiency.
Solar photovoltaic bracket aluminum alloy guide rail
Material: high strength aluminum alloy AL6063-T5
Surface treatment: silver white anodic oxidation oxidation film thickness: 8~10μm
Specifications: 40* 30,41 * 32,40 *40, 46* 42,42 * 46,26 * 50,30 * 50,26 * 53,26 *63(mm)
Size: 3m ~ 6m (customized)
Application: suitable for most crystalline silicon components and thin film components, for photovoltaic floor or roof system installation
: 10 years warranty and 20 years service life
Solar Panel Roof Rails,Aluminum Support Bracket,Solar Pv Bracket Rail,Solar Panel Mounting Rails
Jiangyin Yuanlv New Energy Materials.Co.,Ltd , https://www.yuanlval.com