What is included in chemical damage?

Chlorination


Chlorine is a very effective oxidant for cyanide. Commonly used chlorine reagents are chlorine gas, sodium hypochlorite and calcium hypochlorite. Alkaline liquid chlorination is the most common method of destroying cyanide in solution. The liquid discharged from the heap can be chlorinated and returned to the heap for residual cyanide in the destructive loop. Other leachates can be treated similarly. The reaction of free cyanide and chlorine is fast and efficient. Only iron complexed cyanide is resistant to chlorination.

After the leaching is finished, the leaching residue is contained. >0.5g /L industrial grade calcium hypochlorite solution treatment, consumption per s residual residue Value="272.4" unitname="g"> 272.4g Calcium hypochlorite, this method is fast and effective.

(2) Air - sulfur dioxide

Recently, INCO has destroyed cyanide to a relatively low level with air- S0 2 or air - sulfite. Under the condition of pH control and a small amount of copper as a catalyst, the cyanide can be rapidly decomposed by mixing with wastewater and SO 2 air. Selectively oxidizing the cyanide and cyanide complexes of metals, but also to remove iron cyanide complexes by alkaline chlorination can not be removed. This treatment can be carried out at room temperature using only lime water, S0 2 and air, and the residual total cyanide content is between 0.05 and 1 mg/L ( between pH 9 and 10 ) . It is currently considered to be the most economical and effective method.

(3) Hydrogen peroxide

Cyanide can also be destroyed by H 2 O 2 , but the cost is too high.

Hardware Mold Base

It can be divided into upper mold and lower mold. The upper mold is composed of a mold handle (punch handle), a guide sleeve, a convex mold, a base plate, a fixed plate, screws, pins, an upper mold seat (upper support), and a stripping plate. The lower mold is generally composed of a lower mold base, a guide plate (side guide plate), a concave mold, a retaining plate, a bearing plate, a guide pillar, screws, and pins.

Mold base for hardware products;

Shuaigang Mold Base (Yixing) Co., Ltd , https://www.shmouldbase.com

This entry was posted in on