All kinds of metal scraps, waste steel, copper, aluminum shavings, car shells, etc., is produced every day of production, our hydraulic metal baler can compress every kinds of metal leftover materials into qualified charging such as square, cylinder, octagon body and other shaps.Â
This machine reduce your cost of transporation and smelting.
Â
Metal baler is mainly suitable for steel recovering and processing industries, ferrous and non-ferrous smelt industries:
1) lining plate--Hardox500.
2) bale discharging way include turn-out, side push-out and forward-out.
4) designed with quick unit that can improve work efficiency substantially.
Â
| model | Y81T-1600 |
| nominal force | 1600kn |
| press box size | 1600*1000*800mm |
| bale size | 400*400mm |
| bale weight | 130~180kg |
| production | 2.0~4.0t/h |
| total power | 30kw |
| machine weight | about 12ton |
Contact us! We would like to tell you more about our baler system.
All kinds of metal scraps, waste steel, copper, aluminum shavings, car shells, etc., is produced every day of production, our hydraulic metal baler can compress every kinds of metal leftover materials into qualified charging such as square, cylinder, octagon body and other shaps.Â
This machine reduce your cost of transporation and smelting.
Â
Metal baler is mainly suitable for steel recovering and processing industries, ferrous and non-ferrous smelt industries:
1) lining plate--Hardox500.
2) bale discharging way include turn-out, side push-out and forward-out.
4) designed with quick unit that can improve work efficiency substantially.
Â
| model | Y81T-1600 |
| nominal force | 1600kn |
| press box size | 1600*1000*800mm |
| bale size | 400*400mm |
| bale weight | 130~180kg |
| production | 2.0~4.0t/h |
| total power | 30kw |
| machine weight | about 12ton |
Contact us! We would like to tell you more about our baler system.
there will be about 35% carbon black residual from tyre pyrolysis machines
it could be sold directly or refined into better quality ones.
say N330 or N660
it could be widely used for additives
say rubbers for playground, for car tyres, or shoes etc.
usually there are models with capacities from 1-20tons per hour
Working Principle
The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.
Carbon Black Recycling Machine,Continuous Black Oil Recycling Machine,Oil Recycling Machine,Waste Oil Recycling Machine
Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com