High-low temperature impact test box basket structure introduction High-low temperature impact test chamber is divided into two-box and three-box type, three-box type is composed of high temperature zone, low temperature zone, test zone, when the test zone is combined with high temperature zone, can do high temperature When the test, test area is combined with the low-temperature area, low-temperature test can be done. The two-chamber type is to drive the sample to move between the high temperature and low temperature area through the hanging basket to realize the high and low temperature conversion. In the following, we mainly analyze the structure of the basket of the two-chamber high-low temperature impact test box.
The upper part of the two-box high-temperature and low-temperature impact test box is a high-temperature test area, and the lower part is a low-temperature test area. The test sample is mounted on a hanging basket and is controlled by a cylinder to move up and down. When the high temperature test is performed, the three-position five-way solenoid valve is connected after the air source triplet adjusts the air pressure, the cylinder moves downwards axially, drives the basket to move upward, and the lower part of the basket is separated from the box body by the pulling force of the air cylinder. The plate is compacted to achieve a sealing effect. When the low temperature test is performed, the three-position and five-way solenoid valves are reversed, the cylinder moves axially, the basket descends from the gravity, and the basket is pressed by the gravity of the basket to achieve the sealing effect. The upper part of the cylinder is equipped with an inductor. The sensor can sense the position of the piston inside the cylinder, so that the position of the sensor can be adjusted. The distance of the cylinder shaft can be adjusted, and the basket can be adjusted to move downwards when the basket moves downwards. The pressure on the plate, and can prevent the rope from loosening.
The two-box high-low temperature impact test box basket moving device is driven by a cylinder and uses a cylinder, a wire rope, and a roller to pull the basket to perform a temperature impact test.
The cylinder is installed outside the high and low temperature zone. It is connected with the hanging basket through the wire rope. Only the common cylinder can be selected to drive the cylinder. The installation and replacement of the cylinder is very convenient. The upper and lower plates of the basket are equipped with silicone sealing strips and the silicone sealing strip is pulled through. After the rivets are coated with sealant, the sealing performance is good, and the installation and maintenance are convenient.
|
One-piece desktop pneumatic marking machine is the original bench marking machine marking machine of motion control and marking machine head together, at the same time to embed the mini touch computer marking machine, pneumatic marking machine only external all-in-one desktop power supply and air supply can work normally, save the original data cable. All-in-one desktop pneumatic marking machines, more concise, convenient and practical. The two-dimensional worktable of this model is made of precision mold. The original linear guide rail can realize self-lubrication and self-sealing, which can ensure the accuracy as before after working for a long time. The marking precision is high and durable. The structure of the lifting column type guide rail is stable and firm. Integrated desktop pneumatic marking machine can be used for steel, copper, iron, aluminum, alloy, plastic and other metal and non-metal nameplate parts plane and cylindrical workpiece marking, widely used in auto parts, mechanical equipment, flanges, electrical equipment, metal pipe parts and other fields. |
One-piece Desktop Pneumatic Marking Machine
One-Piece Desktop Pneumatic Marking Machine,Desktop Pneumatic Marking Machine,Desktop Benchtop Pneumatic Pipe Marking Machine,Desktop Pneumatic Dot Peen Marking Machine
Jinan Luyue CNC Equipment Co., Ltd. , https://www.sdlycnc.com