HK-Hfrr-001 High Frequency Reciprocating Friction and Wear Testing Machine

• Model NO.: HK-HFRR-001
• Transport Package: Wooden Case
• Origin: China

• Trademark: HK
• Specification: 280× 190× 360(mm)

 
Overview
  HK-HFRR-001 conforms to ASTM D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR).The machine can be used in evaluation of diesel oil within high frequency reciprocating condition ( including lubricant containing diesel lubricating ). Can also be used for detection of lubricating oil and grease lubrication performance, and on the oil film thickness measurement.
 
Features
1. Electromagnetic actuator:Energy conservation, stable and high control precision (no vibration and thrust is easy to control)
2. Push rod design:Push rod design adopts composite and custom made slide way, it features no transverse interference, high straightness of reciprocating motion displacement, stable displa cement and good epeatability. 
3. Oil box design:Oil box design adopts 2ml marked line, convenience to add the oil 
4. Steel ball chuck:Steel ball chuck is convenience to dismantle
5. Heater:Heater adopts PTC ceramic chip, it features uniform heating, safe, long service life, no replacement 
6. Sample steel ball: Diameter:6 mm,Diameter:6 mm,material conforms to ANSIE-52100 28th grade steel of ANSIB3.12, HRC: 58-66, Ra<0.05μm
7. Test Piece:Round steel which conforms to AISIE-52100 standard HV30:190-210,Ra<0.02μm
8. The whole system is installed to a steel pedestal to reduce the inner extra vibration
 
Software main function: 
1. Whole process monitoring of each parameter and data sampling period storage
2. Set the test parameter: Stroke length, reciprocating frequency, friction, test temperature and test time. It also can do the course setting to each parameter.
3. Control the mechanical part running time, it can keep monitoring the stroke length, reciprocating frequency and sample temperature. When the temperature is at the set value, the test will start till it reaches to the test time
4. Record and display the measuring result: Friction average value, oil film value and the relevant curve It can do the microscope communication to the wear scar measurement, call the wear picture and data directly to generate the test result and print
5. Wear scar measuring system:Magnification: 100 times, accuracy: 1μm. Computer captures the wear scar picture, measure the scar size and save the data. There is communication interface
 
Technical Parameters
1. Reciprocating frequency:  10~60 Hz   Accuracy:1Hz
2. Reciprocating stroke:  0.01~2.5 mm   Accuracy: 0.001mm
3. Test temperature: Room temperature~200ºC  Accuracy:2ºC
4. Load: 0.1~1Kg 
5. Maximum friction: 30N
6. Test ball: Diameter:6 mm, material conforms~ANSIE-52100 28th grade steel of ANSIB3.12, HRC: 58-66, Ra<0.05μm
7. Test piece: Round steel which conforms~AISIE-52100 standard HV30:190-210, Ra<0.02μm Oil bath area: 600±100 mm2
8. Wear scar measuring system: Microscope, Magnification:100 times Division:1μm
9. Constant temperature and constant humidity chamber: 
        Temperature control range: 23~30ºC, Temperature display accuracy:0.1ºC, 
        Temperature control accuracy:±2ºC        
        Humidity control range: 40~70%, Humidity display accuracy:1%, 
        Humidity control accuracy≤3%RH
10. Ambient temperature: 5~35ºC
11. Ambient humidity: 20~80%
 
Test condition parameter: 
1. Reciprocating displacement/mm    1.0±0.02
2. Reciprocating frequency/Hz    50±1
3. Applied load/g     200±1
4. Oil sample volume/ml    2±0.2
5. Sample temperature/ºC    60±2
6. Test time/min   75±0.1

Mini writing laser marking machine small laser marking machine has a beautiful appearance, fine, mini design, small size, safe, effective to prevent radiation damage to the human body. Mini writing laser marking machine covers an area of small, easy to move, put it on the desk can also achieve marking work. Can meet your compact size, do not take up space, easy to move and carry requirements. Mini writing laser marking machine is 600mm in length, 450mm in width, 750mm in height and 60kg in weight. So it's easy to transport. Mini writing laser marking machine with high electro-optical conversion efficiency and air cooling, compact size, good output beam quality and high reliability. Engravable metal material and part of non-metal material, fiber laser with integrated structure, no optical pollution and power coupling and loss, air cooling, with high efficiency, long life and less maintenance performance.

Mini Writer Laser Marking Machine

Mini Writer Laser Marking Machine,Mini Laser Marking Machine,Optical Fiber Mini Laser Engraving Machine,20W Mini Optical Fiber Laser Marking Machine

Jinan Luyue CNC Equipment Co., Ltd. , https://www.sdlycnc.com